Ductile Iron Surge Anticipating Valve Nylon Reinforcement With EPDM Diaphragm

Stainless Steel Pilots Nylon Reinforcement Diaphragm Ductile Iron Surge anticipating Valve Anti Water Hammer

A2A5 is a surge anticipation valve and is activated by line pressure and controlled by two pilot valves. Both pilots include spring-loaded membranes. The low-pressure pilot is preset to open the A2A5 gradually when the line pressure drops about 1 bar below normal. The highpressure pilot (on the right) is preset to open the A2A5 when the line pressure rises about 1 bar above normal. The A2A5 is normally closed. Only when the line pressure drops below or rises above the preset limits, the A2A5 is piloted to open. A water hammer event starts with a considerable pressure drop, which cause the A2A5 to open. Then, as the
water wave rolling backward, the valve remains open and let the pressure out to diminish its impact.

Service Fields:
For water system, irrigation system.

Technical Data:

Consult Factory for other applications
IP68 for water resistance
Comply with BS EN 1074-5, ISO 5208, BS EN 12266-1, BS EN 558-1

Materials And Dimension

DN50-DN350

DN400-DN800

Alpine Flow Control (SuZhou) Co.,Ltd with major focus in the water valve design and manufacturing. The Management staff have over 30 years experience in the water valve design and manufacturing, combined with the high-tech electronics manufacturing experience of multi-national listed companies. This unique combination of traditional and high-tech industry management experience and skills have given us an advantage over the traditional valve manufacturer. More than 40% of our staff are technical staff with knowledge and experience in valve and mechanical design/manufacturing...

Proven and supported by on-going quality and reliability test. AFC has built it’s own in house reliability test laboratory to ensure that our products not only meet the international quality and reliability test specification such as the EN-1074-1/2 T-key and R-key test, but also comply to various international valves standards and specifications.
 

We already achieved WRAS certificate in 2011, and obtained FM approval in early of 2012,
and UL for gate valve. Today, we have got many international famous certificate for drinking water such as WRAS, NSF, AS, CE on certain products, and our product range has expended to double eccentric butterfly valve, rubber disc check valve ,non-slam check valve, both clean water & sewage water air valve, hydraulic control valve and penstock and we always focus on water system valves.
 

In 2018 year, our big plan is developing pressure management valves which has been proved to be a very helpful tool and economic way to save the leakage rate with limited investment and get a fast return in couple months and power savings

In addition, we have a special project team to focus on custom design and special requirement
 

Our Mission :
Be the market leader in Water Valve Flow Control
Company culture :
Technology through Innovation
Quality product and service through Quality people
Business growth through Cohesive partnership