1500mpm Take Up Machine 800mm Coiler Basket Reliable For Rod Breakdown Machine

HXE-WF 800 Coiler for rod breakdown machine

I. Application

WF800 coiler for rod breakdown machine is used to take up wire from 1.2mm to 3.0mm.

II. Main technical parameter

1. Applicable diameter 1.2mm-3.0mm

2. Motor AC 22kw, Speed 1500m/min, adjustable

3. Coiler basket size 800mm

4. Small electric cabinet, 1 set, to connect with the drawing machine control system

5. Tension device required, if your drawing machine has Tension device, then no need.

6. Traverse motor AC 1.5kw

7. Speed reduction motor 90w

8. Speed control by Inverter 22kw

9. Air compressor shall be needed during work

10. Basket changing system is equipped

11. Basket block device is equipped

11. All ladders and blockers (Yellow parts) (Screws to fix) will be removed before shipping

12. The machine is a whole piece to achieve running in high speed without shake

13. Needs connection wires from the Coiler to the drawing machine control system

III. Working environment

Altitude less than 1000m.

Temperature: －10℃－40℃

Relative temperature less than 85% (25℃)

Power source 380V, 50Hz, can be customized

IV. Shipping & Installation

Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.

Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.

Adjust

Before adjusting, check and clean all parts.

V. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.