AC 15KW Wire Drawing Machine Ceramic Cone 1500mpm DC Three Section Annealing

HXE-24DT Fine copper wire drawing machine with annealer

I. Quick description

HXE-24DT Fine copper wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.5mm-1.0mm to 0.07mm-0.25mm.

II. Components

III. Main Technical parameters

1. Usage single bare copper wire drawing and annealing. Inlet size 0.5mm-1.0mm. Outlet size 0.07mm-0.25mm (Elongation of annealed wire 25% to 32%). Machine speed/max 1800m/min. Die number 24, Dies size 25mm×8-10mmT, Slip ratio 13%+8%.

2. Wire drawing mode standing-mode and 4 axes. Drive by Inverter control, Brand Inovance, Most widely used brand in drawing machine. Main motor 15KW, Spooler motor 3.7KW, China best brand. Annealing voltage DC50V/max, Annealing current DC300A/max, Annealing power 15KVA.

3. Annealing method DC Three section annealing. Annealing protection will be done by steam protection

Capacity of compressed air 0.4-0.6Mpa, 20L/min. Demand Water quantity for annealing and coolant 200L/min.

4. Machine frame welded by steel plate. Transmission Flat belts. Capstan Ceramic plasma. Lubricating system Pipe Spray. Bobbin size 300mm, loading capacity: 50kg/max. Bobbin loading & unloading type shaft type.

5. Traversing unit 110W synchros motor, width: 270mm/max. Tension control by Air pressure tension control (With Weight balance as Backup) Cabinet 0.8m*0.6m*2.0m. Machine dimension 2.3m*1.6m*1.9m; Installation Area 3.3m*1.7m+0.8*0.6m

6. Machine weight 3400KG, Cabinet weight 500KG. In total for shipping around 4,000KG.

Operation & Maintenance

Preparation before running

Check all the lubrication parts of the transmission parts.

Check Wire-break Auto stop device, Safety doors.

Check coolant water, Lubrication oil, Steam, Compressed air.

After checking, jogging machine as lower than 5m/s (Fix speed capstan lower than 470r/min), check all parts again.

Operation

Connect power.

Prepare the drawing dies.

Prepare the wire pointing and threading.

According to the die list, place the wires on the capstan, wire goes through each layer 2-3 times.

Put wire through the fix speed capstan then through the annealer machine

Annealer machine wire path, please check the Wire path drawing on the machine.

Then put wire through the Wire passing wheels, Tension device, Spooler machine.

After the wire path, close Safety door, adjust Drawing lubrication oil, Coolant water, Steam, Compressed air.

Diameter, Voltage, Current, Speed linkage

Our machine is made according to use`s elongation requirement, nothing to do with copper wire.

Maintenance

Lubricate all the parts, make sure all the wheels and capstans run flexible.

After working 1000hours, clean all the bearing and change new lubrication oil.

Annealing contact rings are consuming parts, after using for certain time, when annealing, will have sparks, which means you need change new rings.

There are carbon brushes on the back side of the annealer machine, need change accordingly.

Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

(4). DC. three-section annealing

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.