45KW Intermediate Wire Drawing Machine 1000mpm For Single Bare Copper Wire

HXE-13DT Large-intermediate copper wire drawing machine with annealer

I. Quick Discription

Large-intermediate copper wire drawing machine with annealer is used to drawing and annealing single bare copper wire from 3.0mm-3.5mm to 0.8mm-2.8mm

II. Main technical parameters

III. Composition

1. Pay-off shelf

2. HXE-13DT Copper wire drawing machine
3. HXE-TH350 Annealing machine
4. HXE-180 Tension controller
5. HXE-SX630 Double spooler
7. Operation panel
8. Drawing control cabinet
9. Annealing control cabinet

IV. Operation & Maintenance

4-1. Preparation before running

Check all the lubrication parts of the transmission parts.

Check Wire-break Auto stop device, Safety doors.

Check coolant water, Lubrication oil, Steam, Compressed air.

After checking, jogging machine as lower than 5m/s (Fix speed capstan lower than 470r/min), check all parts again.

4-2. Operation

Connect power.

Prepare the drawing dies.

Prepare the wire pointing and threading.

According to the die list, place the wires on the capstan, wire goes through each layer 2-3 times.

Put wire through the fix speed capstan then through the annealer machine

Annealer machine wire path, please check the Wire path drawing on the machine.

Then put wire through the Wire passing wheels, Tension device, Spooler machine.

After the wire path, close Safety door, adjust Drawing lubrication oil, Coolant water, Steam, Compressed air.

7-3. Maintenance

Lubricate all the parts, make sure all the wheels and capstans run flexible.

After working 1000hours, clean all the bearing and change new lubrication oil.

Annealing contact rings are consuming parts, after using for certain time, when annealing, will have sparks, which means you need change new rings.

There are carbon brushes on the back side of the annealer machine, need change accordingly.

V. After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

A. Due to wrong operation while shipping.

B. Due to Buyer`s wrong preparation that may cause damage to the machine.

C. Due to Buyer`s wrong operation that may cause damage to the machine.

D. Not in the consuming part list.

E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.