1.6mm High Speed Wire Drawing Machine 14DH Large Spool With AC 15.5KW Motor

HXE-14DH Copper wire drawing machine with large spool

I. Application of machine
This machine adopts programmable controller and dual inverters, the sliding and automatic speed control and variable speed. With energy Low consumption, high reliability, small slip rate, long life, large capacity of take-up, low noise, nice shape, etc.Machine is operation simply, safe, reliable, and easy maintenance. In order to make the user familiar with and master the rules, please users read this manual carefully before using.

II. Parameters
(1) Inlet : ф1.6mm/max copper; ф2.5mm/max aluminum
(2) Outlet: ф0.25-ф0.65mm; ф0.4-ф0.8mm
(3) Mechanical speed: 800MPM/MAX
(4) Dies: 14 (buyer-owned) Max
Dies: 7 (buyer-owned) Minimum
(5) Dies OD: ф25mm X 8 - 12mm thick
(6) Slip ratio: 1 -13, 15%;14, 8%
(7) Main motor: AC15.5KW motor
(8) Take-up motor: AC7.5KW motor
(9) Take-up diameter: ф400 - ф500
(10) brake: pneumatic brakes
(11) Power consumption:15-30kw power
(12) Lubrication capacity: 150L/MIN

III. Components

IV. Note

1. to achieve the requirements of this specification, the cable must be reasonable, good Lubricating fluid, good Dies, and high-quality copper wire.
2. not used the reel without balancing requirement.
Electrical system normal conditions are as follows:
A. Environmental temperature: -10 ℃ ∽ +40 ℃ (no freezing conditions), a 24-hour period, the average temperature does not exceed +35 ℃.
B. atmospheric conditions: air, harmless dust, corrosive and explosive gases.
C. Relative humidity: +40 ℃ when the maximum temperature does not exceed 50%, a lower temperature allows a higher relative humidity of 85% at +20 ℃.
D. Altitude: not more than 1000M, more than 1000M, specified in accordance with this.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.