RV Magnsium Anode Rod Replacement To Anti Fouling Your Solar Water Heater Tanks

RV Anode Rod to anti fouling your solar Water Heater tanks

Most water heater tanks are steel with a thin glass lining to protect the metal from corrosion. Since the lining eventually cracks, tanks have a second line of defense against rust, a long anode rod that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your anode rod before it fails, about every 3-5 years(A magnesium anode), you can double the life of your water heater.

The best time for water heater anode rod replacement is when the steel core is exposed more than 6" either from the bottom or the top; when the middle of the rod is exposed or if diameter is less than half the original size.

Use these steps to replace or remove the water heater anode rod:

• Shut off the power to the heater.
• Turn the cold water supply off.
• Recommendation is to drain out few gallons from the drain valve at the bottom of the heater.
• Drain the heater using the garden hose and route to the open drain. Open a nearby hot water tap to vent heater for draining. Drain to the point below the outlet connection nipple.
• Close drain spigot and remove the hose.
• Remove the water heater anode rod using the appropriate tool.

Removing a water heater anode rod is a simple do-it-yourself home project, where you can use a ratchet wrench to unscrew the old and screw in a new anode rod. Be sure to use Teflon tape on the fitting threads, so it can seal tightly. If only checking, be sure to clean the calcium-carbonate build-up. Buying online is the most convenient way, especially if looking for something specific, like Suburban anode, zinc alloy anode or flexible magnesium anode rod.

Contact me for more details :

Vivian Jiang

International Marketing & Sales Department Manager

-----------------------------------------------

China Hunan High Broad New Material Co.Ltd.

70 Chezhan North Road,Changsha, China 410100

Tel:+86-731-85717705 Fax:+86-731-85716569

Mobile/Whatsapp: +86-139-7488-3816

Email: vivian@hbnewmaterial.com , metal@vip.163.com

Skype: vivian.jjy

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development  in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .