Black Computer Server Rack 42U 600mm * 1000mm Powder Coating For Electric Industry

19 inch 42U 600mm * 1000mm Computer Server Rack data server rack with Toughened Glass Front Door on wheels

High quality nice price 42U Wall mount cabinet.
600*1000mm,1.0mm or 1.2mm thickness
Front door: good look tempered glass door or steel door
Accessories: Shelf, Fan, cable management, PDU
Side door can be open fast and have plastic handle

Features:

1. Comply with ANSI/EIA;RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;compatible with 19’’ international standard, metric system and EISI standard.

2. The overall use of the frame structure,easy to install.

3. Front door with perforated,back door steel plate.

4. Using the upper and lower line way,can be closed up

and down the alignment channel.large hole size in

bottom can be adjusted.

5. Can easily remove the left and right side doors and

front/rear doors.

6. Install high-speed silent cooling fan at the top of the

cabinet.

7. The bottom of the installation of the steeling wheel

to facilitate the movement, through the foot so that

the overall balance.

8. Front door with elastic lock,solid and cabinet

connection.

Surface finish:

Degreasing, pickling, phosphating, powder coating.

Material and Thickness:

Mounting profile:2.0mm

Others:1.2mm

Color:

RAL9004(black)

RAL7044(gray)

Basic structure:

Common cabinet colors are white, black, and gray. (These are divided into many types, such as orange lines, fine sand lines, etc.); cabinets are divided according to material, there are aluminum cabinets, cold-rolled steel cabinets, hot-rolled steel cabinets; according to the processing technology, there are nine-fold profiles Cabinets, 16-fold cabinets, etc.

Plate type, coating material, and processing technology determine the stability of the cabinet. Its length specifications are generally 600,800mm, width specifications are 600, 800, 1000mm, height specifications are 42U, 36U, 24U. Most of the cabinets used in the early days were made of castings or angle steels that were connected or welded into cabinet frames by screws or rivets, and then added with cover plates (doors) made of sheet steel. The cabinets are bulky, heavy and unsophisticated and have been eliminated. With the use of transistors and integrated circuits, and the miniaturization of various components and components, the structure of cabinets has also grown toward miniaturization and building blocks. The cabinet has evolved from the previous full-panel structure into a plug-in and plug-in structure with a certain size series. The assembly arrangement of the subracks and plug-ins is arranged horizontally and vertically. Cabinet materials generally use thin steel plates, steel profiles of various cross-sectional shapes, aluminum profiles and various engineering plastics. In addition to welding and screw connections, the frame of the cabinet is also bonded.

Cabinets can be divided into two basic structures: profile and sheet, depending on the weight of the components, materials, and manufacturing processes.

1 Profiles Cabinet: There are two kinds of steel profiles and aluminum profiles. Steel shaped steel cabinets are made up of special-shaped seamless steel tubes. This cabinet is very good in rigidity and strength and is suitable for heavy equipment. Aluminum profiles made of aluminum alloy profiles have a certain degree of rigidity and strength and are suitable for general or light equipment. This cabinet is light in weight, less in processing volume, and beautiful in appearance and widely used.

2 Thin-plate structure cabinets: The entire panel cabinet, whose side plates are formed by bending a whole steel plate. This type of cabinet has good rigidity and strength and is suitable for heavy or general equipment. However, due to the non-removable side panels, assembly and maintenance are inconvenient. The structure of the curved column column cabinet is similar to that of the profile cabinet, and the column is formed by bending the steel plate. This cabinet has a certain degree of rigidity and strength and is suitable for general equipment.

According to need, the cabinet is also equipped with cabinet accessories. Its main accessories are fixed or retractable rails, locking devices, hinges, cable troughs, cabling racks, and shield comb reeds, etc.

Ningbo Tuxin Communication Equipment Co., Ltd. is a professional cabinet R&D,design,production and sales in an integrated import and export enterprises.The cabinet is designed to provide excellent operating environment for electronic equipment, in order to improve the reliability and safety of electronic equipment operation, reduce equipment maintenance costs, improve efficiency and extend equipment life.
Tuxin cabinet with years of experience in the cabinet manufacturing, high-quality product quality and reasonable price positioning access to the trust of our customers. With the continuous expansion of market demand and the continuous development of the company, "Tuxin cabinet" has been widely used in high-speed rail, airport, bank, IDC room, business, hospital, government, university, chain retail, manufacturing, network operators, military Various fields, products exported to different countries and regions, selling at home and abroad.
The main products of Tuxin cabinet are: cold channel products, micro modules, network cabinets, server cabinets, open racks, wall-mounted cabinets, industrial control cabinets, control boxes, patch panels, distribution cabinets, distribution boxes, integration Cabinet systems, multi-series PDU cabinet power and KVM multi-platform management server and other communications equipment and accessories.
All products are made of high quality cold-rolled steel plate, the surface of nano-treatment, electrostatic spray, for high corrosion requirements of the product can also choose cathodic electrophoresis primer process.