Electric surge protection surge diverter surge arrester 40ka

surge protective device the best lightning protection module

Brief introduction

Surge protector is mainly used for lightning protection measures in family residential circuit system. It is an important manifestation of internal lightning protection. According to the characteristics of the circuit system, we adopt multi-level protection, which can maximize the voltage into the underground, and better achieve the role of lightning protection and overvoltage.

Product features

1. safety insulation of fire retardant and high flame retardant material

2. with the power status indication, indicating the working state of surge protector.

3. use the pluggable module set up, the maintenance is simple

Working principle of product

The function of surge protector is to limit the transient overvoltage to the power line, the signal transmission line in the voltage range that the equipment or system can bear, or to inflow the powerful lightning discharge into the ground, and protect the protected equipment or system from damage by the impact.

Product specification

Use of attention

1. it should match the working voltage of the protected equipment. Please install according to the installation sketch.

2. lightning arrester must be reliably connected to the ground wire of the lightning protection system, and the connection line is short, thick and straight.

3. in order to limit the inductive coupling between the protected part after installation and the part of the unprotected equipment, we need to make some measurements. The mutual inductance can be reduced by the separation of the inductive source and the sacrificial circuit, the selection of the loop angle and the limitation of the closed loop area.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.