Eight Position Hole PDU Power Strip Lightning Protection Socket Aluminum Alloy Row

PDU socket cabinet special SPD surge band lamp lightning protection eight position hole aluminum alloy row.

Product Details

PDU lightning protection socket is a kind of lightning and surge pulse which can quickly absorb the power supply system. [1] ensures the safe use of electrical appliance in bad environment and multi mine area. It is specially used to protect the sensitive equipment of single-phase AC power supply. It is applied to the equipment end as the third level protection of the power supply.

Product features

1. with temperature and overcurrent failure protection circuit, it does not affect the normal operation of the circuit.

2. lightning protection socket has low residual pressure and large flow capacity

3. power indicator to monitor the power supply of the converter

Product specification

1.Rated Operating Voitage(UC): 250V～

2.Voltage protective level(UP):1.0KV

3. Max discharge current(IMAX):6KA

4. Nominal discharge current(IN):3KA

5. Protection mode: L-N

6. technical parameter: MAX2.5KW-MAX10A

Working principle of product

The surge protector of PDU lightning protection socket is very high when no voltage is needed, which is equivalent to breaking circuit. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Use of attention

1. lightning protection socket frame type lightning protection socket press the power switch button, the grounding indicator light (yellow), indicating that the ground is reliable; the working light is bright (green), indicating the normal work of the lightning protection module; the power indicator light is bright (red), indicating the normal connection of the power supply.

2. The grounding terminal of the lightning protection socket is connected with the E terminal of the plug earth wire.

3. The grounding screw with 2.5m square meters above ground wire is connected to the power supply socket type surge protector on

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.