320V 30KA - 30KA Type 1 Surge Protection Device For Direct Lightning Strikes

Thor type 1 + 2 surge protection devices designed to be optimized for direct lightning strikes

Product introduction

Surge protector is a lightning protection measure adopted by Zhejiang toer Electric Co., Ltd., which is independently developed and produced for electrical system. It is suitable for N-S, NT-C, TH-C, TT and LT power supply systems of 50/60Hz 380V and below, which can be used as equal potential connection at the interface of LPZ1, LPZ2 and LPZ3 area, and its design is based on IEC61643-1 and GB18802.1.
With the material, we choose the brand components and make use of the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.

Working principle of product

The working principle of surge protector is a high resistance open state with a low voltage, low resistance and short circuit state at high pressure, and a combination of over voltage protection electronic devices which can withstand hundreds of amperes and large current in parallel on the power supply line and signal transmission line. When encountering lightning and high voltage and high current, it will appear short circuit immediately, and at the same time, the total power switch will be disconnected, so that the device will be protected.

Product features

1. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

2. self protection voltage is more than self protection, automatic disconnection and recovery.

3. module is designed and installed conveniently and can be replaced directly.

Product specification

Notice of product

1. generally speaking, it is better to separate the protected conductor from the non protected conductor, and it should be separated from the ground wire. At the same time, in order to avoid transient orthogonal coupling between power cables and communication cables, necessary measurements should be made.

2. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.

3. lightning arresters are connected in series

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.