| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | 3D Printer Heater |
|---|---|
| Brand Name: | Tutco |
| Model Number: | 110V -240V |
| Certification: | UL |
| Place of Origin: | China |
| MOQ: | 1 |
| Packaging Details: | EXporting packing |
| Type: | Silicone & Cartridge |
| Material: | SS304, Incoloy & Silicone |
| Voltage: | 220V |
| Wattage: | 3KW |
| Warranty: | 18 months |
| Life: | ≥4years |
| Price: | negotiation |
24 Volt Heating Element High Watt Density Cartridge Heaters 12V 24V 110V 220V 230V
1. High Resistivity
2. Operating Temperatures up to 700 C
3. Good Resistance to Oxidation and Chemical Corrosion
24 Volt Heating Element High Watt Density Cartridge Heaters 12V 24V 110V 220V 230V
General Information
A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application. Highly compacted they reach a surface watt density of up to 30 w/cm².
It may be used to heat any kind of substance or material, such as oil, air, or sugar. However, a common application is plastic pellets, which are melted in order to form molded plastic parts. An example of such a process is the "hot runner" process. Cartridge heaters resemble tubular heaters structurally but tend to have higher watt densities.
Characteristics & Properties
| Heat intensity | Not exceeding 30w/cm2 (advisable) |
| Power | Depends on the dimension |
| Exhaust extreme (when cold) | <=0.1mA to 242 v. |
| Insulation (when cold) | 5 Min Ohms 500 Watts minimum |
| Dielectric strength | 1500v. 1/sec |
| Working temperature | 750 Deg C max. |
| Length tolerance | +/-1.5% |
| Diameter tolerance | -0.02 to -0.06 mm |
| Cut off connection tolerance | +/-15 mm |
| Power tolerance (w) | +5 % - 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
Suggested Applications
To Order
Custom heaters, shapes and voltages are available on request.
Please contact us with your special requirements. We are pleased to contact you if you would like more information or want to discuss custom product availability and pricing.
Why TUTCO
1. Heater is UL listed for Outdoor Applications
2. All of the limit controls in all TUTCO duct heaters are
automatic resets or are manually resettable. There are
no devices that have to be replaced when tripped.
3. In a horizontal airflow application, the airflow direction is
not specific; it can go either direction without any modification.
4. With our wire rack element suspension system, the heater
coil is less susceptible to airflow shading and allows a very small
pressure drop across the coils.
5. All TUTCO duct heaters carry a zero clearance rating for
installations into ducts.
|
Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer
Long Lifespan 3D Printer Heater High Watt Density Cartridge Heaters 220V
High / Middle / Low Wattage Density 3D Printer Heater With Thread Multi Purpose
4mm 25w 12v Electric Cartridge Heater , 3d Printer Ceramic Heater Anti Corrosion
Industrial High Density Cartridge Heater For 3D Printer Easy Installation
Ceramic Heater Cartridge 12v 40w , Safety 3d Printer Heating Element
Customized Voltage / Wattage 3D Printer Heater For Injection Moulding
UL Approved 3D Printer Heater With SS304 / Incoloy / Silicone Material
Professional 12v 40w Heater Cartridge For 3D Printer OEM / ODM Available
3d Printer Cartridge Heater , 12v Cartridge Heater Heating Resistant
