| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Polymer Lithium Ion Batteries |
|---|---|
| Brand Name: | TAC |
| Model Number: | 1064145HP-8AH 3.7V |
| Certification: | IEC62133, UL1642 ,ROHS |
| Place of Origin: | guangzhou |
| MOQ: | 500pcs |
| Price: | USD8-9 |
| Payment Terms: | T/T |
| Supply Ability: | 100000pcs |
| Delivery Time: | 15-20day after order |
| Packaging Details: | plastical tray |
| Nominal Voltage: | 3.7V |
| Nominal Capacity: | 8Ah |
| Type: | Li-Ion Polymer |
| Packing:: | PVC Packing |
| Size: | 1.0*64*145mm |
| pack: | 2S 3S 4S 6S |
| Discharger current: | 30C |
| Max discharger: | 50C |
| PVC: | Blue \ black or OEM |
| Brand: | Tac or OEM |
| Company Info. |
| Guang Zhou Sunland New Energy Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
High Power Polymer Li-Ion Cell: 3.7V 8Ah (1064145-30C) for Rob Hobbies
Specification:
| No. | Items | Specification | Remark |
| 1 | Nominal Capacity | 8Ah | 0.2C Standard discharge |
| 2 | Nominal Voltage | 3.7V | Mean Operation Voltage |
| 3 | Voltage at end of Discharge | 3.0V | Discharge Cut-off Voltage |
| 4 | Charge Voltage | 4.2V±0.03V | By standard charge method |
| 5 | Cell Internal Impedance | ≤300Ω | |
| 6 | Maximum charge current | 30C | For continuous charging mod |
| 7 | Maximum discharge current | 50C | For continuous discharge mod |
| 8 | Operation Temperature Range | Charge:0~45℃ | 60±25%R.H. Bare Cell |
| Discharge:-20~60℃ | |||
| 9 | Storage Temperature Range | Less than 1 year: -20~25℃ | 60±25%R.H. at the shipment state |
| less than 3 months: -20~40℃ | |||
| 10 | Weight | Approx: 8g | Finished Cell |
| 11 | Pack Dimension | Height 64mm*Width105mm Thickness 1.0 mm | Initial Dimension |
Mechanical characteristics and Safety Test
Item | Battery Condition | Test Method | Requirements |
Crush | Fresh, Fully charged | Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min. | No explosion, No fire |
Short Circuit | Fresh, Fully charged | Each test sample battery, in turn, is to be short- circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ). | No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃ |
Short Circuit | Fresh, Fully charged | Each test sample battery, in turn, is to be short- circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ). | No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃ |
Impact | Fresh, Fully charged | A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample. | No explosion, No fire |
Forced Discharge | Fresh, Fully charged | Discharge at a current of 1 C5A for 2.5h. | No explosion, No fire |
Nail Pricking | Fresh, Fully charged | Prick through the sample battery with a nail having a diameter of 3mm and remain 2h. | No explosion, No fire |
Handling of Cells
Consideration of strength of film package
Soft Aluminium foil
Easily damaged by sharp edge parts such as pins and needles, Ni-tabs, comparing with metal-
can-cased LIB.
Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
Prohibition short circuit
Never make short circuit cell. It generates very high current which causes heating of the cells
and may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
Such outer short circuit may lead to heat generation and damage of the cell.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the
battery pack.
Mechanical shock
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily.
Similar Polymer Battry Picture for LiPO battery 3.7V 16AH High power 20C discharge li-ion battery for UAV
|
Lithium Polymer Cell GSP555376 3.7V 2300mAh Batteries for Toy
Lipo Battery Rechargeable LP052030 3.7V 200mAh Polymer Lithium For Bluetooth
Polymer Lithium Ion Batteries LP052030 3.7V 260mAh for Toy
Lipo Battery LP073048 3.7V 800mAh Polymer Lithium Ion For Electrial Production
Lithium Polymer Battery Pack LP403759 3.7v 900mah for Table PC
GSP035080 3.7V 1300mAh Polymer Lithium Ion Battery for Mobile phone, notebook PC
GSP041235 3.7V 120mAh Polymer Lithium Ion Battery for PDA MP3 MP4 smart card
Polymer Lithium Ion Batteries for Vidicon Camera GSP053040 3.7V 580mAh
GSP055070 3.7V 1800mAh Polymer Lithium Ion Batteries With PCB
GSP063465 3.7V 1300mAh Polymer Lithium Ion Battery cells with high capacity
