Mini Type Wall Mounted FTTH Fiber Terminal Box For Home User With Four SC Ports

Mini Type Wall Mounted FTTH Fiber Terminal Box For Home User With Four SC Ports

How to laying FTTH drop cable? If it is vertical laying, fix the FTTH drop cable from up to down, fix every 1.5m. If it is horizontal laying, fix both ends and turning point and very 5 to 10 meters.

When laying the fiber optic drop cable, the tensile strength cannot exceed 80% of the allowable crushing strength. The short term tensile cannot exceed 100N. If it is two drop cables, cannot exceed 1.5 times of the tensile and when is it 3 cables, cannot exceed 2 times. And so on, N cables cannot exceed (1+N)/2 times. After the fiber optic drop cable is laid, the tension should be released to keep the natural bending station.

The minimum bending radius should meet the below requirement during laying the FTTH drop cable: 1, Cannot smaller than 40mm during installation; 2, Cannot smaller than 15mm after fixing; 3, The turning point should be evenly rounded and the bending radius should larger than 30mm (bending sensitive) or 40mm (ordinary).

Reserved fiber length of both end of the ftth drop cable should meet the below requirements: Floor fiber distribution reserve 0.2m and the end user terminal box reserve 0.3m. If it is outdoor wall mounted or overhead, it should use self-supporting drop cable and the steel wire should be appropriate tighten and fixed. FTTH drop cable cannot be immersed in water so it cannot be laid underground directly.

Specification Of Fiber End User Terminal Box

Main Features

1, Mini type with compact design;

2, Plastic housing with light weight;

3, Can be pre-loaded with adapter and pigtail;

4, With screw holes at the bottom and suitable for wall mounted installation;

5, Suitable for SC or FC simplex adapter;

6, Press to open, easy and convenient for operation and maintenance.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.