| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Ceramic Plain Bearings |
|---|---|
| Brand Name: | TOB Ceramic Bearings |
| Certification: | ISO 16949 |
| Place of Origin: | China |
| MOQ: | negotiated |
| Price: | negotiated |
| Payment Terms: | T/T |
| Supply Ability: | negotiated |
| Delivery Time: | negotiated |
| Packaging Details: | Cartons or Pallets |
| Material: | Si3N4 |
| Density: | 3.2 g/cm3 |
| Material of Rings & Balls: | Full Si3N4 ceramic material |
| HV Hardness: | 1700 HRC |
| Coefficient of expansion: | 3.20 10^-6/℃ |
| The highest temperature: | 1000℃ |
| Company Info. |
| ZHEJIANG TOP BEARINGS CO., LTD. |
| Verified Supplier |
| View Contact Details |
| Product List |
Full Complement Balls Of Si3N4 Ceramic Bearings, Full Ceramic Bearings
Full Ceramic Bearings of full complement balls of Si3N4 material has an add-ball gap on its side. Because using no cage design, Full Complement Balls Of Si3N4 Ceramic Bearings is able to install more ceramic balls than the standard construction, so the heavier radial load ability could be increased more. In addition, to avoid the limited of the cage material, Full Complement Balls Of Si3N4 Ceramic Bearings has more corrosion resistance and higher temperature application than the full ceramic bearing of ceramic cage. This series of Full Complement Balls Of Si3N4 Ceramic Bearings is not for high-speed circumgyration, so the side with gap shouldn’t be installed on enduring axial load side. As there are add-balls gaps in the inner and outer rings, Full Complement Balls Of Si3N4 Ceramic Bearings couldn’t be used in more axial load application. The highest temperature of recommendation is 1000℃.
| Comparison of bearing material technical data | ||||||
| Technical data | unit | GCr15 | 9Cr18 | Si3N4 | AL203 | ZrO2 |
| Density | g/cm³ | 7.8 | 7.9 | 3.2 | 3.95 | 6 |
| a Coefficient of expansion | 10^-6/℃ | 11 | 17 | 3.2 | 9.1 | 10.5 |
| E modulus of elasticity | Gpa | 208 | 200 | 320 | 380 | 210 |
| μ Poisson ratio | 0.3 | 0.3 | 0.26 | 0.27 | 0.3 | |
| HV Hardness | 800 | 700 | 1700 | 1800 | 1300 | |
| δ Flexural strength | Mpa | 2400 | 2600 | 900 | 220 | 1000 |
| δ Compressive Strength | MPa | 2000 | 1500 | 3500 | ||
| Kc Impact strength | Nm/cm² | 20 | 25 | 7 | 3.5 | 11 |
| λ Thermal conductivity | W/mk | 30-40 | 15 | 3.5 | 25 | 2.5 |
| Ω Specific resistivity | mm²/m | 1 | 0.75 | 10^18 | 10^8 | 10^5 |
| Specific heat | J/KgK | 450 | 450 | 800 | 880 | 400 |
| Application temperature | ℃ | 120 | 150 | 1000 | 1850 | 800 |
| Anti-corrossion | No | poor | Good | Good | Good | |
| Cycle stress | 10*10^6 | 10*10^6 | 50*10^6 | 30*10^6 | 50*10^6 | |
| Destroy model | peel | peel | peel | fracture | peel/fracture | |
| Anti-magnetism | Yes | Yes | No | No | No | |
| Dimension stability | bad | poor | Good | Good | Good | |
| Insulate properties | No insulation | No insulation | Good | Good | Good | |
| Basic properties of staple engineer plastic | ||||||||
| Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
| Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
| Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
| Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
| Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
| Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
| Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
| Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
| Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
| Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
| Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
| flammability UL94 | + | + | - | (+) | (+) | - | + | + |
| Anti-weathering | - | - | - | - | - | - | + | - |
| Note: + =resistant; (+) =partly resistant; - =non-resistant | ||||||||
|
ZrO2 Ceramic Plain Bearings Ball Anti-Canker No Magnetism Isolation For Electricity
Al2O3 Ceramic Plain Bearings Ceramic Ball , At 1100℃ Density Is 3.7-3.99g/cm3
Precision Glass Balls 75% SiO2 , 15% NaO2 , 8% CaO2 Density Is 2.8g/Cm3 , Intension Is 700kg/Mm2
Si3N4 Ceramic Balls For Bearings High Intension Wearing Anti-Canker, Alkali Resistance
Ceramic Plain Bearings Sic Ceramic Balls , Higher rigidity Lower Rupture Toughness
Hybrid Construction Ceramic Ball Bearings , GCr15, AISI440C, 316, 304 For Inner & Outer Ring
Full Ceramic Ball Bearings ZrO2 Full Ceramic Bearings 1300 HRC
High Precision And Mini size Full Ceramic Bearings ZrO2 Or Si3N4
Corrosion Resistance Ceramic Plain Bearings ZrO2 Material Ceramic Cage
