Fusion Bonded Epoxy Coating For Steel Different Color Optional High Density

Introduction:

This series of products is one kind of thermoset pure epoxy powder coating made of epoxy resins and epoxy hardener.

Feature:

---The film has high density and adhesion

---Excellent chemical corrosion resistance
---Excellent physical mechanical properties

---Curing reaction speed can be adjusted according to the customer request to satisfy the requirement of different spraying

---Not suitable for outdoor use directly, without good weatherability

Property:

Density: 1.2~1.8g/cm3(Owing to the different formula and different colors)

Particle size: Different purposes varies, the standard for the average particle size is 40 ~ 50um,

150μm powder on sieve ≤3%,250μm powder on sieve ≤0.2%

volatilization: ≤0.6%

Gel time: under 200℃≥12s, and in accordance with manufacturer’s value ±20%

Thermal properties: ΔH≥45J/g,Tg2≥95℃

Storage stability: Pure Epoxy Powder Coatings should be stored below 30°C in a dry and well ventilated place away from source of heat and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 12months.

Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.

Note: For the low temperature curing powder and powder with the gloss below 40%(60°),the stored temperature should be below 30℃.

Film characteristics:

Spraying: This series product is recommended to use high voltage electrostatic spraying method to coat

Curing guide: 160-230℃/3-5min or customizing design according to customer’s

spraying condition

Field of application: Rebar,single, double and three layer FBE anticorrosion coating for all kinds of steel pipeline of oil and gas

Our Services

1. Epoxy Powder Coatings, Epoxy-polyester Powder Coatings, Polyester Powder Coatings (TGIC/Primid), Polyurethane Powder Coatings, Metallic Powder Coatings, Functional Powder Coatings, Chrome effect Powder Coatings, etc.

2. Curing conditions: 200°C*10min/180°C*15min/160°C*20min.

3. Gloss level:

High gloss (above 85%)
Flat gloss (50%-85%)
Semi gloss (7%-50%)
Matt (below 7%)

Ultra high gloss properties: 450 – 600%

4. Surface appearance: metallic (Gold, silver) effect, chrome (Red, Blue, Green, Purple…) effect, smooth effect, art textures (sandy, wrinkle) effect and so on.

5. According to RAL & PANTONE, We accept customized

6. Application Area: Indoor/Outdoor decorative and corrosion protection

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.