High Temperature Bucket Conveyor System Hopper Sufficient Strength

Hopper,Its material is Q345B,for the Bucket Conveyor System:

The bucket of chain bucket conveyor should use 16 Mn steel material, and have enough strength, it can bear the high temperature of slag.

Chain bucket conveyor installation requirements:

1, The difference high between head and tail bearing center not greater than the distance between 1/1000;

2, The tolerance of the head and tail shaft centerline is two bearings1/1000;

3, The tolerance of the two sprocket is 1 mm;

4, The offset value of centerline of conveyor longitudinal center line is not more than 2 mm

5, The difference of two adjacent on track plate in the vertical plane based on the direction of surface is less than 1/1000, the conveyor length is not more than 5 mm;

6, The two tracks in the plane of the plate relative elevation difference is not less than 1/1000 of the track spacing;

7, The support bars of conveyor longitudinal center line of the plane straightness tolerance 1/500 of the width of stent;

8, The rail must straightening before installation, 1/1000 of the straightness tolerance for measuring length, total length is not more than 3 mm;

9, The various rail joint position should be staggered, stagger position may not act as integer times of the chain plate spacing;

10, The section track shall not be less than two stents bearing;

11, The same horizontal plane of two parallel tracks on the conveyor longitudinal center line of the degree of symmetry tolerance is 2 mm, the limit deviation of plus is minus 2 mm;

12,The track level of the joint dislocation is not greater than 1 ㎜, the high difference is not greater than 0.5 mm;

13, The joint clearance is 3-6 ㎜;

14, After hopper installation, it shall not be skewed；

15, All the wheel and the track should be uniform;

Company Profile：

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. has established perfect quality control system and carried out the manufacturing and management of the equipment according to the requirements of ISO9001 quality management system; In order to have better participation in the international thermal power field, the company has obtained relevant qualifications to directly import and export the power plant equipment and spares. The company has excellent research and development team and experienced production team, which makes the annual production capacity reaches 4000 tons. The products have been adopted by more than hundreds of power plants at home and abroad for the excellent product quality and after-sales service.

  Company's main products:

  Drum type ash cooler, bucket conveyor, bucket elevator, embedded scraper conveyor, scraper slag conveyor, dry type slag conveyor, hydraulic shut-off gate, single roller slag crusher, steel ash bin, slag bin, de-watering bin, electric feeder, wetting mixer, dry type bulk loader, pressure relief valve, dense phase pneumatic ash conveying system, dilute phase pneumatic ash conveying system, coal ash separation system, pneumatic double gate valve, pneumatic swing valve, cone pump, material seal pump, coal ash separator, cyclone collector, wear-resistant ceramic elbow, tee joints, and various valves.

  Adhering to the "first-class design, first-class products, first-class service" principle, the after-sale service department of the company can provide excellent pre-sale service, sales service and after-sale service to the customers.

  1、 Pre-sale service: dealing with various consultations and questions, and sending professional technical personnel to do on-site investigation to provide preliminary design plan and reasonable suggestions.

  2、 Sales service: the engineering technicians will keep contact with the customers positively so as to adjust the design plan, production schedule, and delivery time immediately based on the needs of the customer and report the progress to them at any time, and do all the best to meet the requirements of customers.

  3、 After-sale service: implement “provide on-site service in 24 hours system”, which means the personnel will arrive the customers’ working site to provide service within 24 hours after we got the call of the customers (in China). We will provide high-quality products and good service to the customers and sincerely welcome new users come to visit our company at the same time.