Computerized Control Automatic metal material pendulum impact test equipment

low temperature metal impact testing machine is used for measuring the metal

material resistance performance under dynamic load, in order to determine the material properties under dynamic load. It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research.

2. Standards:

ASTM E23, ISO148-2006 and GB/T3038-2002, GB/229-2007.

3. Features:

3.1 Low temperature system uses refrigeration compressor technology to achieve uniformity of the sample auto-cooling, with the use of heat balance principle and cycle mixing method.

3.2 Which adopts singlechip control, this machine can auto-complete the following actions: rising pendulum, hanging pendulum, sending specimen, positioning, impacting,temperature conditioning

3.3 After impacting the specimen, the machine can raise pendulum with surplus energy automatically so as to be ready for the next test

3.4 Can display material impact absorption power, impact toughness, pendulum raising angle and test average value, and can print the test data and the average value of the test.

5. Standard Accessories

5.1 Main unit----------1 set

5.2 Pendulum

5.3 Span specimen plate (L = 40mm)----1 pc
5.4 Specimen centering plate (L = 40mm)(U, V)----1 pc
5.5 Stripping attachment----1 pc
5.6 Internal hexagonal wrench (S=30mm)---1 pc
5.7 Anchor bolts (M16x300mm)---4 pcs

5.8 Impact testing security guards----1 pc
5.9 Low temperature device---1 pc

5.10 Automatic sample sending and automatic positioning device---1 pc

5.11 PC Testing-software ---1 pc

5.12Lenovo computer---1 set

5.13 HP Printer---1 set