Motorized Vehicle Access DZ -130 car park barriers with straight arm

WONSUN Vehicle Access DZ-130 barrier gate car parking system with straight arm

Product parameters:

Highlights:

Common malfunctions and solutions:

1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.

2.The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.

3. There is no reaction when pressing the remote controller buttons,
a. Please check whether the power is supplied to the barrier gate or not,
b. Please check whether the fuse is burnt out or not
c.Please check whether the code both in the remote controller and the controller board are accordant or not

HOW TO USE?

• Please select the right type of the barrier gates according to the specifications of the place.Fix the barrier gate case board with expansion bolts.

• Fix the boom to the boom tray with the boom press board, then cover the boom capuche with the screws.

• After that ,fix the cover of the boom to the splint and fasten them with four screws of 4*16, and slip the cover tap with the cover by two 3*10 screws.

• Unlock the clutch device with the clutch key clockwise .Move the boom to the horizontal and vertical manually to make sure there is no obstruction.Then turn on the power .

Our service:

1.Professional staff answer your questions in English.

2.Customized design and OEM/ODM.

3.Supported by our professional engineers.

4.Special discount of our distributors or agents in their area.

5. Welcome you to visit our factory.