Economical Manual Cut Diameter 35mm Metallographic Cutting Machine with Speed 2800rpm

Economical Manual Cut Diameter 35mm Metallographic Cutting Machine with Speed 2800rpm

Technical Data Download: iqualitrol Cutting Machine XCut-340

Brief Introduction:

iqualitrol XCut-340 (Q-2) can be used to cut various metal or non-metal specimens (select different cutting disc according to different materials) so as to observe the metallographic and lithofacies structure.

XCut-340 (Q-2) features high performance, low noise and high finish of specimen cutting sections, etc. And has nice appearance and it is easy to operate safely and reliably.

Since XCut-340 (Q-2) metallographic cutting machine is equipped with a cooling device, it is used to take away the heat generated during cutting, thus avoiding the sample to change its metallographic structure when it is heated.

The ideal and necessary specimen preparation instrument used in factories, scientific research institutes and colleges, etc.

When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.

One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.

Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the iCut-864 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.

Technical Specifications:

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.