ASTM A312 A249 Polished Stainless Steel Tube Big OD 50mm 60mm 76mm Thickness

ASTM A312 A249 Polished Stainless Steel Tube Big OD 50mm 60mm 76mm Thickness

Detailed Product Description

ASTM A312 A249 Stainless Steel Welded Tube Pipe 50mm 60mm 76mm Thickness

OD: 10-3600MM

THICK: 0.3-76MM

Material: TP304/316L/321/304H/S31803/32750

Standard: A312/A249/A554

Certificate: PED/ISO/BV/SGS

A249
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.

1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TO310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.

1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.

1.4 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.

1.5 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. (A combination of values from the two systems may result in nonconformance with the specification.) The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

Chemical Composition:

Dimensional Tolerences
all dimensions in inches (mm)

Tobo Pipeline Equipments(Shanghai)Co., Ltd., is located in Shanghai, we are one of the biggest manufacturers Pipeline products in China. We are intelligent entity specializing in developing, manufacturing and selling pressure pipe units. The main products contain flanges, elbows, tees, reducers, bends, stub ends, caps, forged socket welding fittings and threaded fittings and the materials of its products contain carbon steel (A105, A106, 20#, 20G, Q235, 16Mn), stainless steel (304, 304L, 316, 316L, 1Cr18Ni9Ti) and alloy steel(12Cr1MoV, Cr5Mo, 10CrMo910, 15CrMo, ASTM A234 WP1, WP12, WP11, WP22). All products can be manufactured upon some standards such as American Standard ASME/ANSI and MSS, German Standard DIN, Chinese Standard GB/T, SH, HG, JB, SY and Japanese Standard JIS, while some non-standard products can be manufactured In addition, the insoluting joint developed and manufactured by our company can be widely applied to cathodic protection system of steeliness pipeline used in delivering oil, gas and water