RFID Cement electronic tags / Buried Underground electronic tags / Precast Concrete tags

RFID Cement electronic tags made of special process, can be directly buried tags cement road surface or underground, is suitable for the underground cable, manhole covers, underground pipes and other applications. Can be used to mark inside the wall or the ground under the location information of the object,technology can also be used to read and write files precast concrete cement,it will permanently remain in the concrete component. This special tag will be the identification of the component and can be used as the E-Guide for the blind.Just use RFID reader around the land or surface scan, the tag can be found and read the corresponding information.The tags can be read in the water.ODM and OEM products according to customer's demand.

Application scenarios:

1, the oil (gas) pipeline buried unable to pinpoint its location;

2, the buried water pipes can not connect to pinpoint the location of the valve.

3, sat on a wall inside the pipeline unable to pinpoint the location of the connection point.

Using: Insert the electronic tag into 2-3cm deep of the concrete’s surface before the concrete is solidified. The tag is able to work in any environment. Once the concrete has solidified, the tag will be kept in the component forever and work as the E-File of this component.

Technical parameters:

Protocol standards: UHF ISO18000-6 c (EPC C1 Gen2)

HF ISO14443A/ISO15693

LF ISO11784/11785

Operating frequency: UHF 860-960MHz

HF 13.56 MHz

LF 125 KHZz

Material: Cement+Aluminum etching electronic tag ,or PVC and other materials

Size: Φ139mm, thickness 9mm, Can be customized

Working temperature: -25℃-+85℃

Electrostatic protection: ESD>1.5 KV

Environmental protection: RoHS compliant

Service life: >10 years (high temperature washing)

Read distance: UHF >8M (in an open environment, >1M (dry sand cover), >65cm (buried)

HF/LF 2-5cm

ID write: Can be repeated 10000 times