1 Inch CA25T Type Diaphragm Pneumatic Pulse Valve for Dust Bag Filter

1 Inch 24V DC 110V AC 220V AC CA25T Type Pneumatic Pulse Valve Diaphragm Valve for Dust Bag Filter

One Inch Port Size Pulse Jet Valve Technical Parameters:

CA electro-magnetic pulse valve is a right-angle valve, with the 90 angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the bag house blow tube to provide good air flow and dust clean pulses satisfying the requirement.
Valve body and cover are pressure die cast aluminum alloy . Normally, diaphragms are made from Buna N elastomer, and are suitable for temperatures ranging from -40 degrees F to 180 degrees F. Viton material diaphragms are option for high temperature applications.

Features of Our High Performance Diaphragm Pulse Jet Valve Which is Similar as CA/RCA25T Type:

1, Class leading performance coupled with extremely rapid response
2, Cleans more filter area per valve than before
3, NO spring failures
4, 1 MILLION CYCLES guaranteed
5, Proprietary engineering thermoplastic elastomer blend for consistent performance throughout the temperature and pressure range
6, Environmentally endurance tested at the extremes

Air Clean System Diaphragm Pulse Jet Valve Construction:

Pulse Jet Valve Maintenance:

Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled.

Diaphragm and pilot inspection should be conducted annually.

Detailes of G1" Nominal Port Size Diaphragm Pulse Jet Valve and It's Overall Dimensions pls refer to above display window.

Pulse Valve Characteriestic And Performance

Pulse Jet Valve Installation:

1, Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.

2, Ensure tank and pipes are free from dirt, rust or other particulate.

3, Ensure supply air is clean and dry.

4, Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.

5, Apply moderate pressure to system and check for installation leaks.

6, Fully pressurise system.

7, Test fire and listen for proper actuation and crisp pulse noise.

We Alse Sell Solenoid Coil and Armature Assembly, Welcome Your Enquiry:

Welcome your any question, we will response at once.

Pls contact us: brandon.bao@brandopneumatic.com

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on