Incoloy 800 Nickel Alloy Steel Seamless Pipes , Stainless Steel Pipes And Tubes

Incoloy 800 Nickel Alloy Steel Seamless Pipes , Stainless Steel Pipes And Tubes

Specifications

100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test

Description & Name: Incoloy 800/800H/800HT tube UNS N08800/N08810/N08811 nickel alloy seamless pipe/tube

Standard: ASTM/ASME B/SB 163,ASTM /ASME B/SB407

Material: Incoloy800/800H/800HT,825, Inconel 600,601,625,617,690,693, Monel 400, Monel K500, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.

UNS N08800/N08810/N08811 Chemical Composition%
Alloy Designation	Element	C	Ni	Cr	Mn	Fe	Si	Cu	Al	Ti	S
Incoloy 800	Min. %	-	30	19	-	39.5	-	-	0.15	0.15	-
	Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015
Incoloy800H	Min. %	0.05	30	19	-	39.5	-	-	0.15	0.15	-
	Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015
Incoloy800HT	Min. %	0.06	30	19	-	39.5	-	-	0.15	0.15	-
	Max. %	0.1	35	23	1.5	-	1	0.75	0.6	0.6	0.015

Mechanical Propeties		Incoloy 800	Incoloy 800H	incoloy 800HT
Density:		7.9g/cm3	7.9g/cm3	7.9g/cm3
Melting Point:		1350-1400°c	1350-1400°c	1350-1400°c
Tensile Strength Min.(Mpa):		520	450	450
Yield Strength Min. (MPa): 0.2% offset		205	170	170
Elongation A 5%(min.):		30	30	30
Rockwell Hardness Max.:		B95	B95	B95

Nominal Dia: 1/2 "to 10" NB for seamless pipe

Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)

Length:30 m(Max) or as your requirement

Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish: Annealed & pickled, bright annealing, polished

Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end

Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

UNS N08800/N08810/N08811 is characterized by:

-High creep strength
-Very good resistance to oxidation
-Good resistance to combustion gases
-Very good resistance to carburization
-Good resistance to nitrogen absorption
-Good structural stability at high temperatures
-Good weldability

The grade can be used at temperatures up to about 1100°C (2010°F). In order to have the best ductility this grade should be used above 700°C (1290°F). Because of its high nickel content and prescribed maximization of (Ti + Al) content, Sanicro 31HT shows extremely little tendency to precipitation of embrittling phases.

Inspection and Test Procedure

1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material

2.100% Dimension & Visual Examination

3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test

4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT)

5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)

6.Straightness Test (optional)

7.Roughness Test (optional)

8.Intergranular Corrosion Test(optional)

9.Impact Test (optional)

10.Grain Size Determinations (optional)

NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.

     TOBO GROUP sales head offce in Shanghai. 

     We are one of the Professional manufacturers Exporter  Pipeline products  in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicians. 

      We have five branch factories which can supply the best quality pipes, tubes, fittings flanges and related accessories. Now, it owns a number of advanced pipe production equipments, metal, forging, machining, cold forming, hot extrusion, such as heat treatment process, producing 60, 000 tons of pipe fittings. Company with a variety of detection devices, such as nondestructive testing, chemical analysis, metallographic examination, physical experiments. The technical is very strength, our main products contain fittingsforged socket welding fittings and threaded fittings, pipe weld and the materials of the products contain stainless steel ,duplex-stainless steel alloy steel.

       In addition, we are authorized by more than 120 top-class mills from South Korea,Japan and China like JFE,SUMITOMO,POSCO,BAOSTEEL, TISCO,LISCO,.TPCO,HENGYANG VALIN and so on .

Our main products as follows:

• Stainless steel pipe & tube

(seamless pipe / welded pipe / square pipe /  rectangular tube,duplex stainless / inconel tube)

• Carbon / alloy steel pipe & tube

(seamless pipe / ERW / SSAW / LSAW / UOE / hollow section pipe / Galvanized Pipe)

• Tubing and casting

(line pipe,water pipeline,gas pipeline,oil pipeline)

• Special steel tube

(copper tube/titanium tube/aluminium tube/nickel alloy )

• steel bar 

(round bar/angle steel /flat steel/channel steel/steel wire)

• Pipe Fittings

(eblows, equal / reducing tees, concentric/eccentric reducers, caps, crosses, bends, dish end/end cup, stub ends, unions, couplings / hex couplings, swage nipples , nipples, hex. plug, sockolet, weldolet, thredolet, etc)

• Flange

(DIN flange/ AISI flange/blind flange/welding flange/stainless flange/slip on flange)

• steel sheet / coil

(stainless steel/carbon steel/alloy steel/galvanized steel/aluminium )

• Valve

(ball valve/gate valve/butterfly valve/globe valve/swing check valve/ check valve) 

      In order to comply with the global modernization services development trends and eliminating the varieties distress of the global enterprise‘s purchase in the consumables.. We coordinate the pressure pipe manufacturer which with the scale of production,quality control and high cost performance (has passed ISO 9001 quality series attestation, ccs, DNV,PED/97/23/EC,AD2000-WO,special equipment manufacturing license,ASME-SA182.through a variety of effective assort mechanism to make up the shortage of supply and Post-processing of VAT enterprise, and to supply high quality pipe fittings, because of the superior quality and good service, we have established long term business cooperation with more than 60 countries and areas,which covers Europe, Africa, South America, North America, Middle East, Taiwan and South East Asia and so on.

      With many years effort and support from our valuable customers, these products have obtained a big market share in the world. 

      Our business principle is "Superior quality, Competitive price, Timely delivery and Considerate service " Standing to the principle of “Enterprises focus on the core business”, TOBO will actively promotes the globalization of business strategy approach, using advanced supply chain management technology to service for clients with higher quality and more competitiveness ‘ s products. At the same time, we sincerely reply your inquiry, honesty waiting for your visiting and wish to have cooperation with you at the any time. We welcome all the customers to contact us for more information. We assure you, with our technical knowledge and experience, our company will be one of your Stable, Continuate business parters in China.

 info@tobo-group.com