8-Port 10 / 100Base-Tx and 2-Port 1000Base-Fx Industrial Grade Managed Fiber Switch

8-Port 10/100Base-Tx and 2-Port 1000Base-Fx Industrial Grade Managed Fiber Switch

industrial Optical Ethernet switch with 2*1000Mbps SFP ports and 8*10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. OP-GY208’s high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. It also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial enviroment.

Key Features

• 8x10/100BaseTX Ports + 2x1000BaseFX SFP Ports
• OP Ring Protection (OPRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
• 8K address table for auto-learned unicast addresses
• 4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
• Flexible load distribution control and fail-over function
• Manual, static and dynamic port Static and dynamic port aggregation for bandwidth management
• Port rate limit, broadcast storm control, port mirrring, rich Quality of Service (QoS) features for data traffic control and management
• Black hole MAC address filtering, static and dynamic MAC address management for network security
• Access Control Lists(ACL)
• Secure Shell (SSH) v2.0
• IGMP snooping
• SNTP, SMTP
• SNMP V1, V2c, V3
• Supports RMON statistics, history, alarm and event
• Web-based network management interface
• Supports port and VLAN management
• On-line firmware upgrade
• Two privilege level accounts
• Syslog
• Dual power input for high reliability
• DIN rail or panel mounting for easy installation
• Performance
• IEEE Protocol:
• 802.3 10Base-T Ethernet
• 802.3u 100Base-TX and 100Base-FX fast Ethernet
• 802.3x Flow Control and Back Pressure
• 802.1p Class of Service
• 802.1Q VLAN Tag
• 802.3ad LACP
• 802.1D-2004 STP
• 802.1w Rapid STP
• 802.1s Multiple STP
• 802.1x
• Non-blocking store-and-forward shared-memory switch architecture
• MAC address:8K
• Network management: Web-based, CLI, Telnet/serial console, windows utility and SNMP management.
• OP Ring Protection: recovery time within 20ms
• Firmware upgrade: Web, online
• Port Configuration
• RJ45 Port:Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
• 1000Base-FX Optical Port: SFP port
• Single-mode:20, 40, 60, 80,100, 120Km,optional, depend on your SFP module
• Multi-mode: 550M
• Wavelength: 850nm, 1310 nm, 1550nm
• DOWNLOAD PROGRAM Port: Based serial network management (RS-232), RJ45
• Alarm output interface: One relay alarm output. Support power, port link and ring network alarm
• Indicator: Port link, ring fault/abnormity alarm indication 10/100/1000M Rate, run indication

Specification

Ordering information

FiberRoad founded in 2005, is committed to developing and manufacturing and selling network communication products. In particular, the focus on fiber optical technologies, Ethernet technologies and the integration of broadband access technologies. With leading-edge technology and high quality service as the driving force, FiberRoad continued steady growth, and become a top global equipment supplier of innovative last-mile access in the telecommunications market.

Products and Market
FiberRoad products include a broad line of FTTH,Fiber Media Conversion platform, Manageable media converters, Fiber Switch, SFP transceivers, components and subsystems,. CWDM/DWDM system , Passive products, In addition, we supply analogous products to telecom fixed wavelength, data communications and cable TV markets.

As our professional engineering team have devoted ourselves to the R&D for a long time, so that the products have been quiet mature. We have received much popular recognition from our current Telecom operators, Telecom engineering contractors, and Solution Partners in the world. This alliance covers Europe, Asia, the Middle East, Africa, plus North and South America. This global partnership receives direct engineering and technical support from our company headquarters in Shenzhen.

As services such as voice and multimedia are moving to IP based technologies, carriers have found that their core networks can be operated more effectively and economically if the public switching networks are migrated to a next generation IP based networks. This proactive thinking will allow FiberRoad to continue developing IP Camera solutions for today and tomorrow's markets.