Trimble R10 GNSS RTK Base Rover with TDL-450H and TSC3

2013 Trimble R10 GNSS RTK base and rover with TDL-450H and TSC3 Complete Kit
Condition: Like new, used only a few times and has been very well taken care of, EXCELLENT CONDITION!!!

Everything is has been checked / tested Ready to work, is in full working order plus includes the case & accessories

1 YEAR OLD with 1 Year Extended Warranty!

Trimble R10 Dual Frequency GPS GNSS RTK Set. This set up is in very good condition and ready to go to work. These are the smallest and lightest receivers in its class. They have 450-470mhz frequency internal radio's with UHF Transmit (TX) option enabled in both receivers. So either one can function as a base station or a rover without a need for an external radio.

Both the base and rover are currently programmed at 12.5khz (So you would be FCC compliant). These unit's also have the 20hz update rate option enabled which makes them extremely fast. The R10's combine powerful features and groundbreaking technologies including Trimble HD-GNSS, Trimble SurePoint, Trimble 360, and Trimble x They have been shop tested and are ready to work out the box. The TSC3 is in good condition and loaded with Trimble Access software and 2.4ghz radio for robotics. Roads can be added for additional cost. The Trimble TDL-450H radio has a max power of 35 watts for long range surveying. It is also programmed to the 12.5khz bandwidth. That means this entire system is FCC compliant. These unit's track L1, L2, L2c, L5 Galileo, Glonass and Compass satellites. These unit's are used so they have a few scrapes and scratches but nothing that affects performance. This unit can be used in an RTK set or on a VRS network. This is a complete RTK set.

Package Includes:
Base
- 1X Trimble R10 Rover, 20hz update rate, Dual frequency L1, L2, L2c, L5, Galileo, GNSS Bluetooth, RTK capable, 450-470mhz internal RX/TX radio,

Base Radio
- 1X Trimble TDL-450H 35 Watt Radio with 12.5khz Bandwidth

ROVER
- 1X Trimble R10 Rover, 20hz update rate, Dual frequency L1, L2, L2c, L5, Galileo, GNSS Bluetooth, RTK capable, 450-470mhz internal RX/TX radio,
- 1X TSC3 field controller with Trimble Access software and 2.4ghz internal radio
- 2X Batteries
- 2X Dual Charger
- Collector Cradle
- Cradle Holder
- Cables
- Carbon Fiber Rover Rod
- Crain Bi-pod
- Radio Antenna Tripod
- Trimble 2 Meter Fixed Tripod
- 3X Hard carrying case (R10 base, R10 rover, TDL-450H)