water based mold release agent

...Water Based Mold Release agent for EPDM Sealing Pipe Application Field: It is perfect for the release of EPDM sealing pipes Advantages: Easy to use Safe and environmentally friendly Prevents build up on the molds Semi-permanent multiple demoulding gloss surface Application: Molds should be clean before using. Apply a thin coat of our release agent. Suggested dilution ratio is 1:5 Wait until the water...

...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe ...

...proprietary manufacturing method. It functions as an efficient anti-adhesion agent, mold release agent, separator, and sticking inhibitor, making it ideal for rubber and plastic applications. The emulsion forms a uniform, slippery coating on the surface of

Water Resistane And Anti-Sticking Wax Dispersion For Water-Based Ink And OPV WQ-W40 Wax Dispersion Introduction WQ-W40 is a synthetic wax dispersion emulsion with 40% solid content. It is recommended to be used in water-based coatings to improve the slipperiness, anti-sticking and water resistance of products. It can be used as a lubricant and softener for yarns in the textile industry; water-resistant agent and mold release agent...

... system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces but may be used with most thermoset resins. PVA release film is not