Name: ET48200 M5E32A 2U Compact Telecom Power System HighDensity 12KW RackMount
Brand: ESTEL
Price: 1 USD

Product Details
Company Profile

ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount

ET48200 M5E32A 2U Compact Power System - High-Density 12KW Rack-Mount For Telecom

Introduction

The ESTEL ET48200 M5E32A is a new embedded compact power supply, featuring a novel architectural design that delivers a small size and high power density (up to 12KW in 2U). This system prioritizes customer flexibility.

Its high-density pluggable circuit breakers and rectifiers allow for effortless field configuration to meet diverse application requirements. The MR48 series rectifiers paired with the MC2600 controller guarantee safe, reliable, and flexible operation. Compact enough for most cabinets, it's an ideal replacement unit. Built on ESTEL's proven technology, the MR48 series is poised to meet future demands.

Key Features

Standard 19-inch width, versatile;
2U highly compact design, saving space and installation cost;
Intelligent management, online remote maintenance, reduce site access and maintenance costs;
Perfect battery management to extend battery life;
Provides a variety of communication ports;
LAN/RS232/RS485 interface, LAN-SNMP, TCP/IP to achieve flexible networking and remote monitoring;
The rectifier module and controller can be hot-swappable, convenient online maintenance;
Wide AC input voltage range (90~300Vac);
Intelligent management: online remote maintenance reduces site visits and maintenance costs.

Application Scenarios

Site expansion
Wireless base station
Transmission network
Communication network of enterprises

Specifications

Product Model		ET48200 M5E32A
System	Dimension(mm)	482.0(W)350.0(D)2U(H)
	Weight	< 10kg (without rectifier module and packaging)
	Cooling method	Natural cooling
	Installation	19-inch rack mount
	Routing method	Front inlet and front outlet
	Maintenance method	Front maintenance, support hot-swap
	Protection level	IP20
AC Distribution	Input mode	Single-phase 220V
	Input capacity	1 * 63A/2P
	Frequency	45~65Hz, rated value: 50Hz/60Hz
	AC SPD	10kA/20kA, 8/20μs
DC Distribution	Output voltage	-43~-58VDC, rated output: -53.5VDC
	Maximum capacity	9KW (3kW*3)	12KW (4kW*3)
	Battery breakers	2 * 125A/1P
	Load breakers	2x10A/1P,2x20A/1P,2x32A/1P,2x63A/1P(Max 8 load MCBs )
		1 x LVD 200A
Rectifier Module	Input voltage	85VAC～300VAC, Rated value: 220VAC
	efficiency	≥96.6%
	Rated output power	4000W (176Vac～300Vac)
	Working temperature	-40℃~+75℃(fully output below 50℃)
	Size	106.5mm(W)×286mm(D)×41.5mm(1U/H)
	Weight	≤2.1kg
	Cooling method	Forced cooling
	Power Factor	≥0.99 @220Vac 20-100% Load
Controller	Signal input	4 Al(3 Battery temp., 1 ambient temp),7 Dl(SPD, 6 common Dl)
	Alarm output	6 dry contact
	Communication ports	RS485, SNMP
	Display mode	LCD
Environment	Operating temperature	-40℃~+65℃
	Storage temperature	-40℃~+70℃
	Operating humidity	5%~95%(non-condensing)
	Altitude	0~3000m (When the altitude is between 2000m and 3000m, the maximum operating temperature decreases by 1°C with every 200m increase in altitude)

Diagram

MR483000HG2B-CS

Maximum efficiency >96%
Power derating from 55℃ to 75℃
Output power derating at <176VAC
High power density

ACInput		DC Output
Input Voltage (Nominal)	110VAC/220VAC	Output Voltage	-42 to -58VDC,rated: -53.5VDC
Input Voltage Range	85 to 290VAC	Peak Efficiency	>96%
Max Input Current	18A	Maximum Capacity	3000W
Input Frequency	45 to 65Hz	Maximum Output Current	56.1A
Power Factor	≥0.99 (220VAC @ 20% to 100%load)	THD	≤5% @ 50% to 100% load
Control and Monitor		Environment
Communication Protocol	CAN	EMC	EN55032 class B；EN55035;IEC61000-3-2；IEC61000-3-3
LED	Green-normal; yellow-alarm; red-fault	Safety	UL62368-1;EN62368-1；IEC62368-1

MR484000SG1-GS

l Maximum efficiency >96.5%

l Power derating from 45℃ to 75℃

l Output power derating at <176VAC

l High power density

ACInput		DC Output
Input Voltage (Nominal)	110VAC/220VAC	Output Voltage	-42 to -58VDC,rated: -53.5VDC
Input Voltage Range	85 to 290VAC	Peak Efficiency	>96.5%
Max Input Current	26A	Maximum Capacity	4350W
Input Frequency	45 to 65Hz	Maximum Output Current	81.3A
Power Factor	≥0.99 (220VAC @ 20% to 100%load)	THD	<3% @ ≥50% load
Control and Monitor		Environment
Communication Protocol	CAN	EMC	EN55032 class B；EN55035;IEC61000-3-11；IEC61000-3-12
LED	Green-normal; yellow-alarm; red-fault	Safety	UL62368-1;EN62368-1；IEC62368-1

MC2600 Controller

Introduction

MC2600 is the new generation DC power controller developed by Megmeet. The controller adopts AR 32-bit cortex-M4CPU as primary processor. Mc2600 offers many features and functions, and a more robust, user-friendly, and easy-to-useinterface, Powerful hvbrid power management function includina diesel management, VRLA and ithium-ion batteriesand solar modules.

Key Features

Automatic battery test including advanced scheduledtest, constant test and short test
Minimize installation time using configuration fileupload feature
Lower operating cost due to energy saving standbyfunction for rectifier
Manages from 1 to 40 rectifiers

Measurement

24 x Analog & 9 x digital imput readings including: system voltage, load curent, battery current, battery temperature, 8*Dl, 8*D0, etc

Communication

The controler communicates with the host computer in 2 modes: Rs485 and ethernet (WEB or SNMP). Setting and editing operationalparameters, downloading data logs and history alarm are available via WEB browser. Communication between the controller and therectifiers and the solar modules utiizes CAN communication.

SNMP protocol supports GET, SET and TRAP 4xRs485 ports for battery BMS, DG or extension function device

Alarm History Log

1000 event alarm history log, FlFO for system analysis

System Statrs Log

1000 records of output voltage and load current readings, and 50 records of historical battery test readings

LCD&LED

128 x 32 LCD screen display to access status, alarms, user settings; green/yellow/red LEDs indicate operation status and alarms

Battery Management

Float/Boost charge
Battery test
Temperature compensation
Battery capacity prediction
Low voltage/cap disconnection
Low/high temperature
disconnection

Battery Management

Manages multiple Megmeetrectifier and/or solar modulsewithin one system
Equalize rectifier run time for
lifetime optimization
Optimize number of active
rectifiers for highest efficiency

Alarms/Events

SPD alarm
Digital input alarm
Load fuse alarm
Manual mode alarm
Current imbalance
Ambient temperature alarm
Load disconnect
AC power failure
Battery fuse alarm
Battery discharge
Battery test fail
Battery imbalance
Battery disconnect
Battery temperature sensor fault
Battery temperature alarm
BMS communication fai
Rectifier AC input failure
Rectifier fault
Rectifier fan fault
Rectifier protection activated
Rectifier on/off status
Rectifier communication fail
System energy-saving mode
Energy-saving mode interruption
Solar module communication fail
Solar module fault
Solar module fan fault
Solar module protection activated
Solar module on/off status
Solar module input failure
AC over voltage and under voltage
DC over voltage and under voltage

MC2900 Controller

Introduction

Mc2900 is the latest generation DC power controller developed by Megmeet. it is based on ARM Cortex-A8 CPU, 256Nflash, 512M SRAM and linux operating system. Mc2900 offers a more robust, user-friendly, and easy-to-use interfaceThe controller provides the management function of rectifier, solar module, wind module, Dc/Dc module, HVDC modulediesel, VRLA battery and lithium-ion battery.

Key Features

lpv4 static/DHCP,lpv6 static/DHCP, TCP/IP, UDP,HTTPS, SNMP V1/V2C/V3
Multilingual LCD and web display
Controller firmware upgrading via USB/WEB/WIFl/bluetooth
Manages from 1 to 48 rectifiers

Measurement

22 x Analog & 12 x digital imput readings including: system voltage, load current, battery current, battery temperature,Ambient temperature,ambient humidity,12*Dl. 8*DO.etc.

Communication

The controller communicates with the host computer in 2 modes: Rs485 and ethernet (TcP/p, UDp, https and SNMp). Setting and editinooperational parameters, downloading operational history and alarm history are available vid WEB browser. Communication betweenthe controller and the rectifiers and the solar modules utilizes CAN communication.

SNMP protocol supports GET, SET and TRAP 4xRS485 ports for battery BMS, DG or extension function boards

Alarm History Log

200000 history alarms and 100000 history events

System Statrs Log

5000 battery test logs, 5000 battery charge logs, 5000 battery discharge logs, 5000 DG running logs

LCD&LED

128 x 160 LCD screen display to access current operating conditions, alarms, user settings; green/yellow/red LEDsindicate operation status and alarms

Collection and Management

Rectifier,solar module, wind module,DC/DCmodule, DC/AC module, HVDCmodule data
Narada and shoto lithium battery packdata collection
Lithium battery of any modbus/YDT-1363protocol based on RS485 or CAN interface
Jiangsu yaao batteryinspection datdacquisition
Smart AC meter or self-developed ACmetering board data collection
Smart DC meter data collectionSmart DG data collection and management
Smart ATS data collection and managementClimate data collection and managementSmart CB data collection and management
Energy calculation

Battery Management

Boot and float management
Charge current limitmanagement
Temperature compensation
LVD
Battery test
Midpoint voltageCapacity calculation
Peak cut
Lithium battery management
Switch according tobattery capacity
Switch according tobattery voltage
DG test
Remaining fuelcalculation
Energy input prioritymanagement
Rectifier energy savingmanagement
Rectifier rotation

Alarms/Events

SPD alarm
Digital input alarm
Load fuse alarm
Manual mode alarm
Current imbalance
Ambient temperature alarm
Load disconnect
AC power failure
Battery fuse alarm
Battery discharge
Battery test fail

Batteryimbalance
Battery disconnect
Battery temperature sensor fault
Battery temperature alarm
BMS communication fail
Rectifier AC input failure
Rectifier fault
Rectifier fan fault

Rectifier protection activated
Rectifier on/off status
Rectifier communication fail
System energy-saving mode
Energy-saving mode interruption
Solar module communication fail

Solar module fault
Solar module fan fault
Solar module protection activated
Solar module on/off status
Solar module input failure
AC over voltage and under voltage
DC over voltage and under voltage

Product Tags:


*From:	Your email address is incorrect!
*To:	Tianjin Estel Electronic Science and Technology Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Telecom Power System
Brand Name:	ESTEL
Model Number:	ETP2504033-1
Place of Origin:	China
MOQ:	1
Price:	Negotiation
Supply Ability:	1000
Certification:	ISO9001, CE, 3C, FCC, TLC
Package:	cartons
Battery Input:	2×125A/1P breakers, LVD 200A
Rectifier:	MR48 series (MR484000SG1-GS: 4000W, 96.5% efficiency)
Ac Output:	220VAC ±10%, 50/60Hz, 63A Max (Single-Phase)
Battery Distribution:	43~-58VDC, rated -53.5VDC
Input Voltage Dc:	85-300VAC (Rectifier input)
Nominal Capacity:	9KW standard, 12KW maximum (with 3×4KW rectifiers)
Produced By:	ESTEL

Main Markets	Total Revenue (%)
Domestic Market	50.00%
Africa	15.00%
Southeast Asia	10.00%
South America	5.00%
Central America	5.00%
Australia	3.00%
Mid East	3.00%
North America	2.00%
Southern Europe	2.00%
Eastern Europe	1.50%
Northern Europe	1.00%
Western Europe	1.00%
South Asia	1.00%
Eastern Asia	0.50%

ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount

ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount

ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount

Compact Telecom Power System

2U Telecom Power System

Rack-Mount Telecom Power Supply

ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount