Impulse Testing Equipment For Electric Vehicle Charging Testing IEC 61851-1

1.2µs/50µs Impulse Dielectric Withstand EVSE Testing Equipment

Complied Standards & Clauses

IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 12.3

IEC 60664-1 "Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests"

IEC 61180 "High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment"

Equipments Overview

This tester is specially designed to evaluate transient overvoltage resistance, as well as to verify electrical clearance and creepage distance between components.
Suitable Test Samples
Ideal for testing a wide range of electronic devices, including:
• Household Appliances
• Audio/Video Equipment
• Consumer Electronics
• Similar Low-Voltage Electronic Products
Key Feature
During a breakdown test, the unit simulates real-world failure conditions:
Visible spark and audible noise when breakdown occurs
Peak voltage drops sharply (nearly to zero) upon discharge
Repeatable behavior during subsequent tests at same voltage, indicating reliable fault detection

Technical Parameters

Model	SN1104
DC high voltage	Max. 12.5kV
Impact cycles	1 ~ 9999
Working power source	Rated voltage: ~ 220V±10%, 50Hz
Peak voltage: 300 V~ 12,500V	Low: 300V~2,500V High: 2,500 V~ 12,500V
Impulse voltage wave	Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % (Note: the waveform can be checked by an external oscilloscope.)
Instrument internal resistance	12Ω± 10%, 40Ω± 10%, 500Ω± 10% three resistance built-in, can be switched by choosing different terminal
Polarity	Positive and negative
Impact interval time	5 ~ 99s
Dimension	630mm×600mm×380mm
Weight	30 KG

Details

---

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment,  electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.