Product: DS200IMCPG1CGC GE power supply interface board

Description

The GE IAC2000I Power Supply Interface Board DS200IMCPG1CGC can be connected through a cable to the DS200SDCC Drive Control Board. Connect the cable to the 1PL connector on the Drive Control Board.

The DS200IMCPG1CGC is a power supply interface board from General Electric and a component of the Mark V series. This board typically connects via cable to the 1PL input connector on the SDCC drive control board. It is a heavily populated board that designed with a small three-position terminal strip in its lower right-hand corner and additional connectors including multiple vertical pin connectors, a varying number of pins as well as stab-on connectors. There are several fuses and metal oxide varistors located on the board?s surface to protect it from changes in voltage. Any blown fuses can be removed and replaced if required however be sure to remove power from the board before switching out components.

Other board components include heat sinks, resistor network arrays, transformers, transistors, integrated circuits, resistors, jumper switches and capacitors of varying power. Two LEDs are also located on the center of the board. Most components carry a reference designation in regards to their placement and may also be marked with other codes for identification.

Recommended Products

Photos

We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famouse PLC DCS product maintenance service providers in the world.

Our products are widely used in CNC machinery and metallurgy, oil and gas, petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment / environmental protection, municipal engineering, Heating, energy, transmission and distribution industries.

We have large of inventory for our company's advantage products

All of kinds of DCS、PLC parts：

Germany KONRAD:

EC6423 / EC6424 / EC6426 / EC6430 / EC6432 / EC6433 series of eddy current sensors,

EC20382 displacement sensor, MMS7000 monitoring and protection system.

Bently Nevada:

3500 system / 3300 system monitoring and protection system, the front eddy current sensor probe

Germany EPRO

PR6422 / PR6423 / PR6424 / PR6426 eddy current sensor, PR9268 series of electric absolute vibration sensor,MMS6000 system.

ENTEK:

Eddy current sensor probe, vibration monitoring table dual channel shaft vibration watch table C6652.

VIBRO-METER:

Vibration sensor, acceleration sensor, eddy current sensor, monitoring system module gateway communication module.

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Schneider Modicon:

Quantum 140 series: CPU processor module, communication module, analog input and output modules, digital input and output modules.

GE:

IC63 / IC695 / IC697 / IC698 / IC200 / IC660 / IC670 and other CPU modules, communication modules, analog digital modules.

EX2100, EX2000 Excitation system card IS200 series, DS200 series.

Invensys Foxboro:

I / A Series system, FBM (field input / output module) sequence control, trapezoidal logic control, accident recall processing, number

Analog conversion, input / output signal processing, data communication and processing.

Invensys Triconex:

Redundant fault-tolerant control system, and the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture.

Westinghouse:

OVATION system, WDPF system, WEStation system spare parts.

Honeywell:

Alcont, Experion LS, Experion PKS, Experion HS, Plant Scape,

TDC 2000, TDC3000, TPS, security systems.

ABB:

AC800M series module, industrial robot spare parts DSQC series, Bailey INFI 90,800xA, Advant OCS withMaster Software, Advant OCS with MOD 300 software, Freelance - Distributed control system for the process industry

Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony / INFI 90, security systems, etc.

Emerson:

DeltaV systems, dual-channel redundant security systems, redundant controllers, power modules, and

I / O unit, Analog AI module, Analog AO module.

Siemens:

Siemens MOORE, 6ES5 series, 6GK series, 6DD series, 6AR series.

Yokogawa:

CS3000 system CPU controller module, analog module.

Woodward:

SPC valve position controller, 505 / 505E (9907-162,9907-164,9907-165,9907-167) digital controller,

2301A controller 9905 series, 2301D-ST series