| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Lump and Neck Measurement |
|---|---|
| Brand Name: | Screate DALA |
| Model Number: | F2010-K |
| Place of Origin: | CHINA |
| MOQ: | Negotiable |
| Price: | Negotiable |
| Payment Terms: | T/T, etc. |
| Delivery Time: | 7 - 15 working Days |
| Packaging Details: | standard packing, as customer demands |
| Certification: | CE |
| Measurement data: | diameter and ovality, lump and necks |
| Application: | electric wire&cable, steel wire ,enamelled copper wire, etc. |
| Measurement: | 0.2~10mm |
| Repeatability: | ±0.1μm |
| Accuracy: | ±（0.0005+0.01%*D)mm |
| Size: | 155*140*58mm |
| Working power source: | 24V ±10% 40VA |
| Communication: | WIFI,RS485 MODBUS RTU,CAN,PROFINET,PROFIBUS,ETHERNET IP |
| Company Info. |
| SCreate Dala Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
DALA F2010-K can be managed by computer ,cellphone and Touch screen,like parameter setting ,measurement data management ,
and so on,customers can choose as their application request.
| Model | F2010-K |
|---|---|
| Axis | 2-axis |
| Measurement data | diameter, ovality, lump and necks |
| Frequency | 10KHz/axis |
| Measurement range | 0.2~10mm |
| Repeatability(1) | ±0.1μm |
| Accuracy(2) | ±(0.0005+0.01%*D)mm |
| Min defect height | 0.01mm |
| Min defect length(3) | 0.2mm(wire speed120m/min) 0.8mm(wire speed500m/min) |
| Size | 155*140*58mm |
| Working power source | 24V ±10% 40VA |
| Running temperature | 5℃~50℃ |
| Display | LED display |
| Commuincation port | Standard:WIFI,RS485 MODBUS RTU,CAN Option:PROFIBUS,PROFINET, EtherNet/IP,EtherCAT |
| Data colletion & analysis | available (option DS14 ZT display and control system,DMS1000) |
| Out-of-tolerance alarm | available |
| Transparent mode | available |
Note:
(1) set sliding window as 100ms, outside diameter repeatability of φ1mm round rod at measurement center area
(2) set sliding window as 100ms, outside diameter deviation of φ1mm round rod at measurement area
(3)set defect measurement average time as 0ms, the minimum defect length which cannot be missed at the measurable area
(4)PI feedback control is option, but must order at placing order
|
