Tin Liquid Mold Making Silicone Rubber RTV Resin Moulding

Description of MCSIL-20 series RTV2 silicone liquid rubber:

MCSIL-2015A/B is soft silicone with hardness Shore A 15. It is a kind of of two- component materials consisting of part A flowable silicone base which when mixed with the curing agent or catalyst,cures at room temperature by a condensation reaction. It is widely used for making molds for candle, soap, wax, plaster cornice, small crafts etc.

Advantages of MCSIL-20 series RTV2 silicone liquid rubber:

1.Good flowability

2.Long working time(30~40min, 60~80min,90~100min)

3. Low hardness

4. High tear and tensile strength

5. Easy de-mould from complex replica parts

6. Acid and alkali-resistance

7. Low linear shrinkage

Applications of MCSIL-20 series RTV2 silicone liquid rubber:

Tin cured silicone can be used for casting polyurethane, epoxy, polyester resin, PU resin, cement, plaster, gypsum, candle,soap,waxes, toys crafts, poly resin crafts, Lighting, plastic toys, stationery gifts, statue,furniture decorative materials, building decoration material, sculpture, sandstone, low melt alloys/metals, urethane and so on.

INSTRUCTION of Tin Cured RTV2 silicone liquid rubber:

The surface of the original should be clean and free of loose material. If your products with thin flower patterns, and especially with porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

Mixing

Please weight 100 Part A base and 2 parts of Curing Agent in a clean container.Thoroughly stir Part A base silicone before use, as filler separation may occur uponprolonged storage. Mixing Part A and Part B evenly until the CA30 completely dispersed in the base.

It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 3-5 mins under vacuum,the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

Pouring the mixture and curing

Pour the mixed Part A base silicone and part B the curing agent as soon as possible onto the original, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice youde-mold after 24 hours, it is will improve the replicate times of silicone mold.

Package of MCSIL-20 series Tin Cured RTV2 silicone liquid rubber:

Part A base silicone: 1kg /Jar; 5kg per bucket, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle

Storage

When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

Certificates

1. who are we?
We are based in Guangdong, China, start from 2010,sell to Domestic Market(67.00%),North America(10.00%),Southeast Asia(8.00%),Mid East(8.00%),South America(3.00%),Western Europe(2.00%),Eastern Europe(2.00%). There are total about 20-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Liquid Silicone Rubber, RTV-2 Silicone Rubber, Silicone Putty, Silicone Potting Compound.

4. why should you buy from us not from other suppliers?
High quality RTV2 silicone rubber,Competitive price of RTV2 silicone rubbers Mould making silicone rubber, Liquid silicone rubber,LSR,RTV-2 rubber,RTV-2, silicone for molding, high quality silicone,silicone putty, silicone potting compound,etc.

Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials.

Our professional approach to all our work, together with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials. We pride ourselves on the different types of mould making materials we offer.

Why Choose Us?

Our Advantages
More than 20 years experience in moldmaking & casting industry
10 years exporting experience

Benefits of MC Silicone
1- A Technology Team: R&D Support
2- A Factory: customize for you in every possible aspect
3- A Sales Team: assist you develop more markets
4- Fast Delivery time about 3-5 working days per order
5- Professional Sales Service, 12-24 hours response
6- Various Payment Method

If you're looking for a good silicone supplier, you've come to the right place. Our unique vision and mission drives us bring the best products and service to each of our clients. We gonna be your guide in silicone industry, we are your partner. Welcome to Join us.