Structural CFRP Fabric , Carbon Reinforced Plastic Durable OEM ODM Acceptable

Philippines Standard High Strength Carbon fiber CFRP fabric for structural strengthening

Weight: 300gsm

Density: 1.8g/cm³

Packing: 100 meters/roll

Width: 100mm, 200mm, 300mm, 500mm or to be customized.

Storage Condition:Store dry at 40°-95° F(4° -35°)

Shelf Life: 50 years

Color:Black

Carbon Fiber Type: 0° (unidirectional)

Philippines Standard High Strength Carbon fiber CFRP fabric for structural strengthening

Carbon fiber reinforced polymer fabric (CFRP fabric composite strengthening system) for structural strengthening, repairing and retrofitting of masonry, concrete, steel and wooden substrates. CFRP composite strengthening of columns,beams,slabs,walls,piles,pier caps in building,bridge,highway,railway,tunnels,piers and civil airport.

The primary benefit of CFRP fabric systems versus traditional retrofit and repair methods is that significant flexural, lateral, axial or shear strength gains can be achieved with an easy-to-apply composite that does not add significant weight or mass to the structure of building, highway, bridge, tunnel.

CFRP fabric strengthening of existing structures can involve complex evaluation, design, and detailing processes, requiring a good understanding of the existing structural conditions along with the materials used to repair the structure prior to CFRP installation. The suitability of CFRP fabric for a strengthening project can be determined by understanding what CFRP fabric is and the advantages it offers, but more importantly, its limitations.

Key Features of CFRP Fabric

• Flexible

• High strength

• High modulus

• Easy to install

• Long shelf life

• Light self weight

Application Range

Load increases

Seismic reinforcement

Improve structural state

Damage of structural parts

Change the structural function

Remit mistakes in design and construction

How to Use CFRP Fabric

• Surface treatment

• Applying primer

• Leveling

• Applying carbon fiber adhesive

• Externally bonded carbon fiber reinforced polymer(CFRP) fabric

• Applying carbon fiber adhesive again

• Curing and protecting

Preparation works

Surface must be clean and sound. It may be dry or damp, but free of standing water and frost. Remove dust, laitance, grease, curing compounds, impregnations, waxes, foreign particles, disintegrated materials and other bond inhibiting materials from the surface. Existing uneven surfaces must be filled with an appropriate repair mortar. The adhesive strength of the concrete must be verified after surface preparation by random pull-off testing (ASTM D 4541) at the discretion of the engineer. Minimum tensile strength required is 200 psi (1.4 MPa) with concrete substrate failure (typical).

Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive.

Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010.

As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad.

You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.