18 Core Fiber Optic Distribution Box With Huawei Type Waterproof 18 Adapters

DA-18HA-20 Fiber Optic Distribution Box

Dawnergy’s DA-18HA-20 fiber optic distribution box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

Features

• IP 65 Protection lever
• PC+ABS, Size: 295*220*140
• Each side have 9 drop cable slots for Huawei Type water-proof adapters (Totally 18)

• One mid-span port (uncut cable) and 2 cable glands, additional cable input port on both sides, suitable for Max. OD 12mm cable
• Each 24f splicer tray has PLC slot for install mini type 1x8 or 1x16 PLC splitter (Max support 4pcs trays)
• Suitable for wall and pole mounted
• External cable storage device option

Applications

• FTTH Solutions

Specifications

Environmental requirement

• Working temperature:-40℃～+85℃
• Relative humidity:≤85%(+30℃)
• Atmospheric pressure:70KPa～106Kpa

Thunder-proof technical datasheet

• The insulation resistance between the grounding device and the metal parts of the box is no less than 2 MΩ/500V(DC)；IR≥2 MΩ/500V
• The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V(DC)/min, no puncture,no flashover；U≥3000V

Product Installation

Wall-mounted installation

Pole-mounted installation

Suitable for Huawei Type Mini SC Water Proof Adapter

Huawei Type Mini SC Fiber Connector Installation

Rotate the arrow part of fiber connector counterclockwise and take out the dust cap.

The arrow part of fiber connector is above, insert fiber connector into the socket and then rotate the arrow part clockwise.

Ordering Information

DA-8SX-20

Black; PC+ABS; With the adaptor panel for max. 8 pieces of Huawei Mini SC water-proof adapters, 1 mid-span port (2cable inlet holes) and 2pcs single cable ports for Max 14mm input cable; Dimensions (mm): 319*200*97; Wall mounting accessories included(pole mounted kits is option)

Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world.

Our main products are: Fiber Optic Cables, Fiber Optical Splitters,Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber Distribution Boxes, Fiber Optic Sockets,Optical Distribution Cabinets/Hubs,Outdoor Telecom Cabinets, Optical Distribution Frames,Network Rack cabinets, etc. Domestically, our shareholders have a large market share in the centralized procurement of China Telecom, China Mobile, China Unicom and China Tower. At the same time, we are also a qualified supplier for major internationally renowned equipment manufacturers and fiber optic cable manufacturers. Our products are also widely used in special networks such as radio broadcast, television, electric power and military.

Specifically in the international market, through direct supply, partnering with local distributors, or cooperating with internationally renowned communication solution providers, our products have been widely used in the FTTH networks of the following operators: TELEFONICA, TIM , STC, BSNL, TOT, CAT, PLDT, TELKOM INDONESIA, TM, NEPAL TELECOM, AIRTEL, etc.