Top telling zoomlion 375 excavator 24meter demolition articulated
excavator arm
category | model | Part Length | Total length(m) | weight(kg) | Maximum removal height(m) |
Boom3 | 5T | 12.5 | 24 | 4400 | 24M |
Middle arm | | 2.4 | | 1300 | |
Arm | | 9.1 | | 3000 | |
Product Details of Excavator High Reach Demolition Arm
Material: The sheet material is Q355B, the hydraulic steel pipes are Cold
drawn seamless steel pipe, the pin material is 40Cr, the
high-pressure hose is joint venture pipe with 4 layers of wire
coil, the butter pipe is single layer hose, and the bushing into
the large arm base is graphite alloy copper sleeve.
Configuration:1pcs boom,1pcs middle arm,1pcs arm, 8pcs pins, 12 stop valves, 1pcs
bucket cylinder(20t level), all high-pressure hoses, 1 kit Linkage.
Product advantages: the size of the large and medium arm designed by our company is
reasonable, the demolition arm can rotate normally after installing
the crushing hammer, the large and medium arm can achieve 180
degrees of open Angle, and the overall removal height will be
higher. The overall production process is ahead of the average
level of the industry, and the quality of the products is better
than that of the same grade.
True Picture of the Demolition Boom Arm











