3FT 4-1/4FT 5-1/2FT SYMONS Standard head/ Short Head Type Cone Crusher Suit for Nordberg cone rock crusher

3FT 4-1/4FT 5-1/2FT SYMONS Standard head/ Short Head Type Cone Crusher Suit for Nordberg cone rock crusher, for Secondary cone crusher

Product Description

Symons cone crusher is widely used in the metallurgical industry, construction materials industry, road building industry, chemical industry and silicate industry. It is suitable to crush ores and rocks with medium hardness and medium hardness above. It has features of strong crushing force, reliable structure, high efficiency, high capacity, low operating cost, easy adjustment, economical to use and so on. Also symons cone crusher uses the compensating lubricating grease sealing, it can avoid lubrication oil being polluted by dust, so that all parts work reliably and have a long operating life. The safety insurance system of cone crusher uses several spring sets, so the matter and iron ore are down from the crushing cavity and do not damage the crusher, simply and reliably. The cone crusher has standard type and short head type, the standard type is suitable to medium size and the short head type for medium and fine crushing.

Introduction & Application
Symons type stone cone crusher is developed with national patent based on international technology and innovation. It can be extensively used in metallurgical industry, building industry, road construction industry, chemical industry, diluted hydrochloric acid industry and are suitable for crushing hard and mid-hard ores and rocks, such as iron ore, copper ore, lime stone, quartz, granite and sandstone.


Advantages & Characteristics
New special design, simple and reasonable structure, smooth and stable running and low operation cost.
Cone frame is cast steel structure; High pressure points are reinforced by hard steel
Each side of drive-shaft is equipped with roller bearings. Bearing base uses seal ring to prevent lubricating oil leakage.
Hydraulic adjustment devices make it convenient to adjust discharge opening size.
Hydraulic release system consists of several hydraulic cylinders. Easy to release jammed materials.
"Spring type" over-load protection. This release system allows un-crushable materials to pass through without causing damage.
A complete lubricating oil circle system, including oil pump, oil reserve tank, oil pipeline, etc. If oil temperature is over high or oil flows slowly, the machine can be shut down automatically. This protection extends crusher's service life.

Working Principle

Features

Symons cone crusher features :
1. Cubic-shaped end products;
2. Adjustable end products sizes, simple crushing process;
3. The board hammer is made of high chrome, abrasion-resistant, and with powerful impacting force;
4. Non-key connected, easy to maintain, cost-saving;
5. Sound construction and high efficiency.

Specification

Symons cone crusher technology specfications:

Type	Model	Cavity Type	Diameter of cone (mm)	Adjusting Range of Discharge Opening (mm)	Recommend feeding size when the minimum output size (mm)	Max feed size (mm)	Capacity (t/h)	Main Motor Power (kw)	Weight (kg)	Overall Dimension (L×W×H) (mm)
2’FT	PSGB- 0607	Standard fine	600	6-38	70	60	16-50	22	4500	2195×1158×1651
	PSGB- 0609	Standard medium		10-38	95	80	18-65
	PSGB- 0611	Standard coarse		13-38	110	90	22-70
	PSGD- 0603	Short head fine		3-13	35	30	9-35
	PSGD- 0605	Short head coarse		5-16	50	40	22-70
3’FT	PSGB- 0910	Standard fine	900	9-22	102	85	45-91	75	9980	2656×1636×2241
	PSGB- 0917	Standard coarse		13-38	175	150	59-163
	PSGB- 0918	Standard super coarse		25-38	178	150	118-163
	PSGD-0904	Short head fine		3-13	41	35	27-90		10530
	PSGD-0906	Short head medium		3-16	76	65	27-100
	PSGD-0907	Short head coarse		6-19	102	85	59-129
4.25’FT	PSGB- 1313	Standard fine	1295	13-31	137	115	109-181	160	22460	2983×1866×3156
	PSGB- 1321	Standard medium		16-38	210	178	132-253
	PSGB- 1324	Standard coarse		19-51	241	205	172-349
	PSGB- 1325	Standard super coarse		25-51	259	220	236-358
	PSGD-1306	Short head fine		3-16	64	54	36-163		22590
	PSGD-1308	Short head medium		6-16	89	76	82-163
	PSGD-1310	Short head coarse		8-25	105	89	109-227
	PSGD-1313	Short head super coarse		16-25	133	113	209-236
5.5’FT	PSGB- 1620	Standard fine	1676	16-38	209	178	181-327	220	43270	3941×2954×3771
	PSGB- 1624	Standard medium		22-51	241	205	258-417
	PSGB- 1626	Standard coarse		25-64	269	228	299-635
	PSGB- 1636	Standard super coarse		38-64	368	313	431-630
	PSGD-1607	Short head fine		5-13	70	60	90-209		43870
	PSGD-1608	Short head medium		6-19	89	76	136-281
	PSGD-1613	short head coarse		10-25	133	113	190-336
	PSGD-1614	Short head super coarse		13-25	133	113	253-336
7’FT	PSGB- 2127	Standard fine	2134	19-38	278	236	544-1034	400	86730	4613×3302×4638
	PSGB- 2133	Standard medium		25-51	334	284	862-1424
	PSGB- 2136	Standard coarse		31-64	369	314	1125-1814
	PSGB- 2146	Standard super coarse		38-64	460	391	1252-1941
	PSGD-2110	Short head fine		5-16	105	89	218-463		89500
	PSGD-2113	Short head medium		10-19	133	113	404-580
	PSGD-2117	Short head coarse		13-25	178	151	517-680
	PSGD-2120	Short head super coarse		16-25	203	172	580-744

Questions & Answers
1. How long is the delivery time of your product?
The delivery time is within 20 working days.

2. What is the payment term?
The payment term is T/T.

3.How long is the product warranty period?
Our warranty period is 1 year, excluding wearing parts.

4.What's the after sale service of your company?
We will provide foundation drawing to the clients for installation. Besides, we can provide guidance service for installation and operation of workers, etc.

5. Can your company provide wearing parts?
We can deliver you the spare parts within 10 working days after your order. If your equipment are not manufactured by our company, please provide us the wearing parts drawing or number.

Shanghai Runwell Machinery Equipment Co.,Ltd was established in 2002, the company to strive to innovate and do a good job, continue to create the value for customers “for the mission, continuous research and development, improve product performance, improve the company's services System, professional services and strict quality management.”

In the past two years, with the national infrastructure, the development of gravel industry, Shanghai Runwell efforts to innovate, making the product performance improvement to further enhance and continue to meet customer needs. Runwell mine production crusher equipment, mineral processing equipment in the market to win a good reputation. Especially the cone crusher series of products, jaw crusher products, counterattack broken, broken back and sold in domestic and abroad.

Shanghai Runwell(GENERAL PARTNERSHIP) production of large jaw crusher, impact crusher, cone crusher, sand making machine, feeder, shaker, milling machine, widely used in mining, roads, bridges, building materials, coal, Chemical, metallurgical, refractory and many other fields. In particular, the company produced three series of cone crusher: HP multi-cylinder cone crusher, DP single-cylinder cone crusher, PSG Symons cone crusher, but also exported to Indonesia, the Philippines, Thailand, Australia, Brazil, Argentina, Peru, Chile, South Africa, Ethiopia, Kenya, the United Arab Emirates, Pakistan, India, Egypt, Canada and the European Union and other countries and regions.