Fluorescent Ultraviolet Aging Chamber Lamp Exposure Weathering Accelerated ISO 4892

Chamber Type Fluorescent Ultraviolet Lamp UV Aging Test Chamber

Complied Standards & Clauses

The UV Weathering Accelerated Ageing Test Chamber is designed and manufactured according ton the standard requirements of ASTM G 154, ISO 4892-2, ISO 4892-3; ISO 11507; ASTMD 4329, and etc.

Equipment Overview

Technical Parameters

Inner chamber size	1100*620*500 mm(W×D×H)
Outer chamber size	Approx. 1500*780*1800mm(W×D×H)
Irradiation temperature	50～ 70℃
Condensing temperature	RT~60℃
Spray temperature	Room temperature
Temperature uniformity	±2℃
Temperature fluctuation	±1℃
Temperature resolution	0.01℃
Relative humidity	Condensation period≥85%RH; Irradiation period≤75%RH
Lamp wavelength	UVA-340, band 315-400nm, irradiance 0~0.9W/m2 Or UV-B 313, band 280--315nm, irradiance 0~0.9W/cm2
Quantity of lamps	8 PCS
Lamp power	40W/PC
Lamp brand	Q-lab
Lamp lifespan	Around 1600 hours
Distance between sample and lamp	100～300mm can be adjustable, according to standard requirements, the distance should be 50mm.
Lamp Central distance	70mm
Lamp spacing distance	35mm
Number of spray nozzle	4 pcs stainless steel nozzle ararnged in the top low
Water spray pressure	70～200Kpa adjustable
Test time	1～9999 H, M, S, the time can be preset
Control system	Independent research and development of touch screen and PLC controller
Inner chamber material	SUS304 stainless steel plate
Outer chamber material	Painted A3 plate
Radiometer/Sun Eye	1. Model: TEMI-UVI 2. Detection wavelength range: 200nm ~ 480nm. 3. Irradiance measurement range: 0.4W/m2～1.6W/m2 4. Operating temperature range: normal temperature---70 degrees 5. Photosensitive area: Φ12mm 6. Appearance size: 30*30*35mm 7. The illuminance sensor can measure and control the radiation energy in real time and feed it back to the controller. The controller adjusts the PID control in real time according to the set value to ensure that the set value and the actual value are consistent.
Equipment use conditions	Please install the water pipe in advance, and use the 1/2-inch pipe interface; the floor drain or drain pipe interface should be reserved for the placement of the equipment. The drain pipe interface is level with the ground.

UV-A lamp irradiance distribution map

---

UV-B lamp irradiance distribution map

---

---

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment,  electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.