EMC Standard 5.8G Microwave Motion Sensor With Dimmer Switch

EMC Standard 5.8G Microwave Motion Sensor With Dimmer Switch

Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

HT16V (18W).pdf

Features of Dimmable Motion Sensor:

1. 5.8G microwave motion sensor with dimming function.

2. Power factor be equal or greater than 0.9.

3. The output power to the LED is 9-18w

4. Obtain EMC certification,and certificate number is EN55015

5. Suitable for ceiling lights or bulkhead.

6. Sensitivity and reliable

7. IP20 and 3 years warranty.

Technical data of Dimmable Motion Sensor:

On/Off Control Detection Area Hold Time Daylight Sensor

Stand-by dimming Stand-by Output Current

level Period

Dtection Area of Dimmable Motion Sensor:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6M.

Mechanical structure of Dimmable Motion Sensor:

Dimensions of Dimmable Motion Sensor:

Wiring diagram of Dimmable Motion Sensor:

Setting of Dimmable Motion Sensor:

By dialing the code you can set the parameters you want to achieve the effect you want.

Detection area: Hold time: Daylight threshold: Stand-by period: Stand-by period:

In this area, The period of Definition of the The period of The definition

movement will light keeping ambient brightness; light keeping of low output

be detected 100% brightness only when the low output in the stand-by

and able to after moving ambient brightness before it's period.

trigger the objects leave is lower than the completely

sensor.100% the detection preset specific switched off,

detection area area. lux amount,the when it's preset

is also known sensor will be work; as"∞",the light

as the strong when it'spreset as always keep at

sensitivity. "disable",the sensor low output if

will work everytime no movement in

it detects motion the detection

regardness the area and doesn't

ambient brightness. turn off.

Installation Method of Dimmable Motion Sensor:

1.Output current setting:

Set the current of 350mA with plugging the black cap

and pull out to set with 300mA,More options of current requirements.

2.Installation:

The installation finished product drawing is shown:

Application of Dimmable Motion Sensor:

1.Automatically ON/OFF function:

Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".

With sufficient daylight,even With insufficient daylight, After the last detection and the

when motion detected,light when motion detected, present hold time elapsed,

remains OFF. light ON. light OFF.

2.No daylight function:

The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.

When motion is detected, After people leave the After the last detection and

the sensor will switch on the detection area,light remains the present hold time

light to 100% brightness. 100% brightness within elapsed,light OFF.

hold time.

3.Function demo-dimable control/corridor function

With sufficient daylight,even With insufficient daylight, After the last detection the light

when motion detected,light when motion detected, will be dimmed down to the

remains OFF. light ON. stand-by dimming level

(10% or 30%)after hold time

After the stand-by period,

light OFF.

Application of Dimmable Motion Sensor:

User Notes:

1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

5. Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%.

Shenzhen HAISEN Technology Co.,Ltd，founded in March 2013, has become a National High-Tech and ISO9001:2015 certificated Enterprise.Our new facility, an owned property is located along Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave motion sensors, PIR Sensor and wireless control smart sensor products. We have about 40 R&D engineers, they master core hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can see our SMT manufacturing room, product dept with 4 semi-automatic DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow ISO9001:2015 quality management system.
The quality center are 2 parts：
Comprehensive Testing: Verification & Assessment of product function and performance at early R&D stage

Quality Control: Quality supervision on incoming materials, manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and International Sales.
To better support our customers, we have set up local offices in East China and Xiamen; and developed agents in China and all over the World.