SBW246502 Sankyo Diebold Opteva Magnetic Card Reader Head TK 1 2 3 ICM 330

SBW246502 Diebold Opteva Sankyo TK 1,2,3 Read ICM 330 Magnetic Head

SBW246502 Diebold Opteva Sankyo TK 1,2,3 Read ICM 330 Magnetic Head

• DN Series™ Motorized Card Reader

The following steps describe the basic operation of the motorized card reader (Figure 2-1).

1.The consumer inserts the card into the slot.

2.The slot has a gate that allows the card to be partially inserted; if the card is properly oriented, the

gate opens and motorized card reader pulls the card in. If the motorized card reader is commanded

to accept chip only cards, the magnetic stripe detection is disabled.

3.The transaction begins when the card is inside the reader.

4.The card is automatically returned to the consumer at the end of the transaction.

3.1

Beginning and Ending a Maintenance Session

The operator should know how to perform the following tasks before using the other procedures in this

section.

•Opening the system to access the card reader.

•Placing the system in the maintenance mode.

•Returning the system to full operation.

Refer to the operator manual for the system for more information about these tasks.

Manually Retrieving Jammed Cards

The consumer's card can sometimes get stuck in the transport mechanism. Use the following steps to

manually remove jammed cards.

1.Place the system in the maintenance mode.

2.To eject a jammed card toward the card reader entry slot, push and hold the plunger of the shut

ter solenoid to open the shutter. Refer to the following figure.

3.Rotate the drive train pulley away from the card slot (counterclockwise) until the card can be re

trieved at the card slot.

• Product Detail

​

• Pics detail

TS TECH (HONG KONG) CO.,LTD founded in 2003 in China,is a leading professional supplier of ATM modules and spares, and help hundreds of customers from around the world to source their NCR, Wincor,Diebold,hyosung,GRG parts.

TS TECH (HONG KONG) CO.,LTD has a professional sales and technical team.Most of our sales have more than 10years experience in ATM industry.Our sales know exactly what machine are used in each Market. They are also experienced in importing&exporting from each country.

It can save your communication times.

Our technical team consists of four members. We have top technicians for every brand.As all of them have years of working experience in manufacturers such as wincor diebold NCR hyosung.They can give you technical support.

We are a direct manufacturer in atm spare parts.our factory located in Guangzhou.TS  also have good relationships with original manufacturer.We can get new original parts from manufacturer.

I trust TS  can give you good support!