2.4G/5G Wifi Mesh Router CS-1000ME Dual Band Omnidirectional Built In Antenna

Wireless transmission rate

Roaming Standard

Wired Interface

Power Interface

One power interface, router uses external power adapter to supply power. The external power adapter shall:

1. Meet the EMC requirements of YD/T 983 and pass CCC certification;

2. Input voltage: 198-242V-50Hz;

3. Output voltage DC: 12V (+5%), ripple range (+200mV), output current: 1A;

4. The MTBF time of power supply is more than 30000 hours.

5. The power interface of the equipment itself and the DC output interface of the power adapter should be a unified international standard circular interface with a diameter of 2.1 mm.

6. The DC output power supply line of the adapter can be equipped with EMI absorption magnetic ring.

7. Under normal conditions, the insulation resistance between the metal housing of the equipment and the power cord shall not be less than 50M.

8. There should be lightning protection and surge protection tests. The lightning protection level should be at least 1.5KV.

Wireless Interface

Wi-Fi Wireless Network

It meets the standard of 802.11protocol,supports802.11b/g/n/a/ac,supports 2.4 GHz and 5 GHz,and has a wireless rate of 1167 Mbps.

Two built-in 3dBi omnidirectional dual-band antennas;

Up to 40 wireless devices are allowed.

Green Long Bright: Good Connection Quality

Yellow Long Bright: General Connection Quality

Red Long Bright: Connection Failure