DVI optical Extender with single core LC 1080P/60Hz 500meter for video conference LED Display

1xLC DVI Fiber Extender,850nm Laser, 4k*2k/30Hz, 2km

P/N: DVI-101M-T (TX)

DVI-101M-R (RX)

Features:

1. Support DVI resolution up to 1920*1200/60HZ(YUV 4:4:4);
2. Support HDMI resolution up to 3840*2160/30HZ(YUV 4:4:4), and 3840*2160/60Hz (YUV 4:2:0) with HDMI to DVI cable;
3. No DDC and HDCP;
4. Offers self-EDID programming feature, detecting from a display and restoring to an EEPROM in the transmitter just by plugging to the display without any physical DDC connection
5. Distance is up to 500 meters over OM3 MMF, or 2km over SMF;
6. Detachable feature with 1x LC multi-mode fibers;
7. The modules are compact enough to directly plug to graphic sources and displays by adopting DVI plugs;
8. Includes two (2) +5V DC power adapters for the transmitter and receiver ;
9. Data security with negligible RFI/EMI emissions and loss of video quality due to no copper conductor present ;

Applications:

1. Digital FPDs, PDPs and projectors for medical appliances, aero, traffic control, factory, and bank

2. Digital FPDs and projectors in conference room and auditorium

3. Kiosk with digital FPDs showing full motion graphic displays from remote systems

4. PDP displays for information in public sites

5. LED signboards in streets and in stadiums

Technical:

Drawing

Dimension [mm]

Product picture:

Diagram:

Installing:

Note: Please install the optic DVI extender according to the following step, if not, the extender should be not working.

1. Power on the Display.

2. Connect the Transmitter unit to the display’s DVI input port.

3. Connect the External Power Supply to the Transmitter unit.

4．Use a stick through the hole on the DVI housing, and press it one time. Wait 3-6 seconds, you can see the blue LED flash on time. Then EDID read ok, if not, EDID read fail.

5. Remove the Power Supply from the Transmitter unit.

6. Disconnect the Transmitter unit from the display and connect it to the video signal source.

7. Connect the Receiver unit to the display and connect the Power Supply to the Receiver unit.

8. Reapply power to the system.

Packing:

Shenzhen UTOP Technology Co., Ltd. Brand is UTOPTEK, specializes in the development, production and sales of optical communications products.

With the high attention of the optical communication industry and years of rich experience, UTOPTEK can provide full range of optical transceiver products and solutions, the products are widely used in the MAN, LAN, Fiber Channel network,Data Center, FTTH, FTTx and other fields. Our customers are covered in domestic China , Western Europe, North America, South America, southeast Asia, Africa, Middle East, and other overseas areas.

The Company closely follow optical communication market trend, offers comprehensive transceivers solution, including: SFP fiber optical Transceiver, Industrial Fiber Ethernet Switch, Fiber Media Converter, Multi-Function Video fiber Converter, POE Switch, EOC Extender, DVI optical Extender, Fiber patch cord, optical fast connector, VFL, FTTH Tools, G/EPON OLT ONU etc...