High Accuracy FTTH Fiber Optic PLC Splitter With SC Connector Low Insertion Loss

Brief Introduction for FA-PLCA1×8SP

PDL ( Polarization Dependent Loss ) is a criterial indice to describe the characteristic of fiber plc splitter . It is the maximum transmission difference of optical devices or systems in all polarization states . It is the ratio of the maximum transmission to the minimum transmission of optical devices .

PDL is defined as follows :

PDL_{dB}=10log〔Pmax/Pmin〕

Pmax and Pmin respectively represent the maximum and minimum output power of the test device ( DUT ) , means when the power is the same, to scan the input light in all possible polarization states and Pmax is the biggest value and Pmin is the smallest value .

PDL is a very important characteristic of optical devices. In fact every device has a polarization dependent transmission . Since the polarization of the transmitting signal is not confined to the optical fiber network , the insertion loss of the device varies with the polarization state . This effect can not be controlled in the transmission link and it has serious impact on the transmission quality . The PDL of some devices will bring large power fluctuations , thereby increasing the bit error rate of the system , and even lead to network failure . Combining with polarization mode dispersion ( PMD ) , PDL may become a major reason of pulse distortion and diffusion .

Technical Specification Of 1x8 PLC Splitter

Typical value is at +23 ℃.

Characteristics of Fiber Fiber Optic PLC Splitter

1. Low Insertion Loss And PDL

2. Large Operating Temperature Range

3. High Accuracy

4. Other Than Standard Product , We Also Offer OEM And ODM Service

All Our PLC Splitter Complies With The Below Standards

YD/T 2000.1-2014 (China National)

RoHS
Telcordia GR-1209-CORE
Telcordia GR-1221-CORE

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.