CPU Water block,Radiator,MS-024-PO,POM black/Stainless steel/Red copper.Rohs

1. Silver alloying brazing water block

The CPU water block MS-024-PO is made of pure copper material which is soldered by silver alloying brazing different

From other water block locked by screws and plastic O-rings. With the pure copper and silver alloying brazing

Manufacture, the CPU water block MS-024-PO presents outstanding heat transfer efficiency even if in low water flow rate.

2. Intel socket compatibility & Easy installation.

The clips of CPU water block MS-024-PO supports INTEL LGA 2011/1366/1156/775

The universal strengthened back-plate not only prevents M/B distortion but also has high compatible installation for all kinds of MBs.

3. Nickel-Planted and mirror polishing treatment on copper base

The high quality nickel-plated and polishing treatment on the base of the water block ensures excellent

Surface contact with heat source and enhances heat transfer efficiency.

4. 3D micro-fin structure and inner micro channel design

CPU water block MS-024-PO adapts 3D micro-fin structure design to form compact inner micro channel.

The compact micro-fin structure increases the surface area of heat transfer to enhance thermal performance under low water flow rate.

5. Easy installation

The CPU WB MS-024-PO is easy to install the water cooling loop and the 1/4”(OD8mm / ID 6mm) and 3/8”(OD 12.7mm / ID 9.5mm) (G 1/4” thread )tube enables upgrade to install series of water blocks. It is easy to replace between 1/4”,3/8” and 1/2”tube.The horse clip (clamp) is also easy to install. The clip of CPU water block MS-024-PO supports most of motherboard in the world.