Rubber & Plastic Dispersion Mixer

Purpose
Usable for rubber or plastic plasticizing and mixing or rubber and plastic blending
Features
1. Rubber or plastic stock can be plasticized or mixed in a closed and pressurized space with the temperature controlled so that the productivity is high and the quality is good and stable.
2. Optimization of the parameters such as the helical angle of rotor wings and the wing overlap length brings about even distribution of the stock.
3. All the parts in contact with stock are ground, plated with hard chrome and polished. The rotor wings are built up by welding with the abrasion-proof sintered carbide to resist abrasion and corrosion.
4. All the parts in contact with stock are of the jacket design where water/steam/medium oil is lead through to provide cooling or heating and can meet different requirements for the rubber or plastic mixing process.
5. Stock is fed through the rear door of the framework (or another port) and discharged by the mixing chamber tilting forward by 140¡ã. Such a design makes it possible to arrange the upstream and the downstream process steps in a line and facilitates stock color changing and the mixing chamber cleaning.
technical specifications
Item/modelX(S)N-
75x30X(S)N-
110x30X(S)N-
150x30X(S)N-
200x30X(S)N-
300x30
Total volume of mixing chamberL180250325440700
Working volume of mixing chamberL75110150200300
Driving motor powerkW110185220280280/400
Tilting motor powerkW445.57.57.5
Tilting angle. 140140140140140
Rotational speed of the rotor (front/rear)r/min30/24.530/24.530/24.530/24.530/24.5
Pressure of compressed airMPa0.6¡«0.80.6¡«0.80.6¡«0.80.6¡«0.80.6¡«0.8
Capacity of compressed airm3/min¡Ý1.0¡Ý1.5¡Ý2.0¡Ý2.0¡Ý2.0
Pressure of cooling water (rubber mixing)MPa0.3¡«0.40.3¡«0.40.3¡«0.40.3¡«0.40.3¡«0.4
Pressure of heating steam (plastics mixing) MPa0.5¡«0.80.5¡«0.80.5¡«0.80.5¡«0.80.5¡«0.8
Overall dimensionLmm33303930420045205070
W26203000330034003500
H33403660390042154600
Masskg1050014500195002250027500