XLW (PC) Auto Tensile Tester

PC Auto Tensile Tester is applicable in the test of physical mechanical properties to plastic films, laminated films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tape, rubber, paper, aluminum-plastic boards and so on. It can do the test of tensile, tensile resistance and elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel. This equipment is designed and manufactured based on mechanical-electrical integration according to GB/T 17200 and each function fully conforms to relative test standards.
1. Characteristics
.LCD displays data and value, super precision up to ¡0.5% of force reading.
.Changeable test range, easy to change.
.Rated force, elastic modulus, and curve analyzed repeatedly.
.Super long stroke, satisfy requirement of materials with big distortion.
.Professional software, standard unit, dispense with manual conversion.
.Analyze batch of test results, put out Max., Min., and average data.
.Data stored as database mode by PC.
.Parameters stored permanently when power down.
.180 degrees peel, 90 degrees peel, strength of tearing, distortion and so on.2. Unit construction
This tensile tester is made up with force load cell, transmitter, micro-processor, load driver, computer and printer. LCD displays data. Seven speeds are available. Desk type. It is designed based on human engineering.3. Functions
Computer with the special software controls the equipment, display curves and results during the full test process. Outstanding functions of software include multiple analysis of batch of test curves, rated tensile and elastic modulus which enable users to obtain the quality controlling parameters. 4. Test items
Tensile, tension resistance and distortion, force and strength at break point, heat seal strength, tear strength, 180 degrees peel (includes T type) and 90 degrees peel5. Operation
Power on (reset) -- welcome screen -- item screen -- parameter preset -- test screen -- clamp specimen -- start test -- automatic return -- results (show the curve) -- test end -- next test ‚¬ lose6. Technical data
Specification: 500N (50N optional)
Accuracy: ¡0.5% of force reading
Test speed: 50 100 150 200 250 300 500mm/min
Test width: 0-30-50mm
Stroke: 1000mm
Dimension: 450(L) mm x 450(B) mm x 1410(H) mm
Ambient condition: temperature: 10C~40 C, humidity: 20%RH~70%RH
Power: AC 220V 50Hz / 60Hz
Net weight: 68kg
7. Configuration
.Standard: mainframe, controller, panel clamp, software, communication cable
.Optional: printer, standard roller, test panels, sample cutter, floating roller clamp, unwinding tools for tape roller, nonstandard clamps
8. Standard
ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, QB/T 2358, QB/T 1130
[Add to My Inquiry Car