25MHz Building Repeater Kit

Features:
Enhances cellular phone reception both incoming and outgoing signals
Easy to install
Built-in AGC, free of interference
Extends the life of a cellular phone battery
Four systems in one repeater (CDMA, TDMA, GSM 850, analog; four systems compatible with CDMA model)
50/75-ohm coaxial cable compatible
Coverage area: 300 to 3,000 square meters (3,300 to 33,000 square feet)
Electrical:
Frequency range: uplink: 824 to 849MHz/downlink: 869 to 894MHz
Bandwidth: 25MHz
Gain: 65dB/70dB/75dB
Gain variation over frequency and temperature: +/-3dB
Noise figure: uplink 8.0dB/downlink 8.0dB
OICP-3: uplink 34dBm/downlink 30dBm
P1dB: uplink 26dBm/downlink 22dBm
VSWR: 2.0:1
RF power output: uplink 20dBm
5dBm downlink for 65dB
10dBm downlink for 70dB
15dBm downlink for 75dB
Power supply: 90 to 240VAC, 50 to 60Hz, 12.2VDC, 1.5A (maximum)
Power consumption: 10W
AGC dynamic range: 20dB (typical)
Mechanical:
Dimensions (H x W x D): 4.1 x 9.7 x 24cm or 1.6 x 3.8 x 9.5 inches
RF connector:
Outdoor ANT side: N(F)
Indoor ANT side: N(F)
Weight: 0.9kg (approximately)
Case: aluminum
Installation: wall or ceiling mount or set on the table
Fastening: four screw holes
Operating temperature: -5 to +45 degrees Celsius
Storage temperature: -15 to +50 degrees Celsius