- find more Samsung screen printing inks YD-E Ink products
Online Product List:
Product List
Other Drive & Storage Devices Products
Contact Details>>-
Samsung screen printing inks YD-E Ink
-
Samsung screen printing inks YD-E Ink
YD-E Ink Products Note--OrderYD-E Ink
YD-E Ink to oxygen epoxy synthetic resin material mixed paint from the goods of the printing operation, the applicability of the material and excellent adhesion with humidity, solvent and so on. The products are heat-treated to the use of two liquid-based inks, especially for polyurethane rubber and other types of plastics, glass, vacuum plating aluminum PC, vacuum plating aluminum PMMA (acrylic) sheet, such as difficult to attach a variety of materials .
Features
Acrylic, ABS, SGM coating material to apply a good coating.
Metal, glass, ceramics, vacuum plating aluminum PC, vacuum aluminum plating PMMA (acrylic) sheet, such as attachment of a variety of material difficult to apply.
Good homework.
Dry well
CompositionDistinction
Composition Series
Contain the volume
Synthetic resin
EPOXY synthetic resin
30 ~ 40
Pigments
Organic pigments, inorganic pigments,
Metallic Pigments
6 ~ 40
Solvent
Aromatic Hydrocarbons
15 ~ 25
Ketone
20 ~ 30
Additives
Defoamer
0.5 ~ 1
Leveling agent
0.5 ~ 1
Total
100
The nature of (white ink base)
Concentration of solid content (%): 542
Viscosity (KU): 1353
Specific gravity: 1.250 ~ 1.300
Use and drySilkscreening
The use of thinner
BC-402 Solvent
The use of sclerosing agent
YD-E Sclerotherapy
Mixing ratio (ink / thinner)
100/20
Mixing ratio (ink / hardener)
100/20 ~ 30
Dry
Forced drying
705 ℃ * 40 minutes or more
Hardener mixing ratio
Sclerotherapy: YD-E sclerotherapy.
Mixing ratio: YD-E Ink: hardener (5:1) = 830g: 170g
Add ink mixing sclerosant fully mixed so that uniform, placed 15 minutes before use.
After sclerotherapy have to add the previous 7 to 8 hours of use. After a period of use after the start hardening ink, please do not over-mixed inks.
Mixed ink curing agent, about the demand for dry fingertips 2 ~ 3 hours, because of hardener hardening time is about 24 hours, so have to completely dry for more than 24-hour festival, not in 24-hour period or place heavy objects such as stacked .
Adhesion test shall be conducted after 24 hours, more time (2 ~ 3 day) the more firmly attached.
Level of dangerous goods
Dangerous goods in the fifth category belong to the fourth category of oil.
Notes
Fully stirred before use.
Following material has not fit the situation fully before use to check the homework.
Must want to use a designated diluent.
Placed in ventilated place easily after use the lid to cover the designated places of custody on.
Please contact custody at the place not suitable for children, is strictly prohibited fireworks, away from the fire source.
Doubt have other matters to the Secretary when asked whether the Institute of Technology.
Security / custody
To protect skin and eyes, use safety gloves and eye protection, if the ink viscosity of the skin, please wash with soap and so full; the event to enter the eyes, the water (or water) fully cleaned, please go to hospital fo
View More details about Samsung screen printing inks YD-E Ink >>
-
Shenzhen Cianda Science & Technology Co.,Ltd
2F,The 7th Units,Heping synthesizes the building,Heping road,Longhua sub- district,Baoan district,Shenzhen ,China. P.C.518109Tel:+86-755-28101348 28103784
FaX:+86-755-28102783
E-mail:china@szcianda.com
- Send your requirement to this supplier.
by Frbiz.com Quality Rank system


