Fire Alarm Control Panel

Feature

1.32-bit MCU 
2. 2-wire communication between detector/module
3. Each detector sensitivity adjustable 
4. Field-programmable with PS/2 standard PC keypad and mouse
5. 7.4" LCD back-lit display
6.Windows menu and interface
7. Chinese or English interface and panel display 
8. CF card duplicate or reset system setup file and history file to facilitate maintenance
9. Communicate with PC via USB
10. Single point start/stop of module £¨Menu operation£©
11.Single point test of detector/module
12.Zone, building or floor display
13.CRT visually display the location of fire and trouble
14.Eleven users each with a password and selectable access levels
15.Field software upgrade
16.20 JB-QBL-2100 peer-to-peer, long-distance optical fiber transmission network via CAN communication transform module17.Flexible collocation by modularized combination

Standards that apply
GB 4717-93  "General Technical Conditions for Fire Alarm Control Units"
GB 16806-1997  "General Technical Conditions of control for Fire Protection Equipment"

Parameter

Capacity: 1. Each I/O-board has two loops, with 198 alarm/control points of each loop (Max. control points-99), the capacity of each I/O-board :2*198=396(points) 2. Each  JB-QBL-2100 can connect maximum 3 I/O-boards, the capacity of each JB-QBL-2100: 3*396=1188(points). 3.  Peer-to-peer with max. 20 JB-QBL-2100 , system capacity:20 *1188=23760(points). 4. Multi-line integrated control/monitoring capacity: Each JB-QBL-2100 can have maximum 4000 points. 5. Bus integrated control capacity:Each JB-QBL-2100 can have maximum 4000 points. Maximum simultaneous alarm of each host: - Fire alarm:500, - Trouble:500,  -  Feedback:500 Operating environment: -  Temperature:-10 to +55 -  Relative humidity:<95%(40 degree,noncondensing) AC power:220VAC,50Hz,3A; DC power:24VDC,7.0Ah