Solar Cell Tester(XJCM-9)

Details:

Solar Cell Tester(XJCM-9)

【Characteristics】1.I-V curve,Voc,Isc,Pm,Vm,Im,FF,Tm 2.Uniformity of illumination ±2% (class A) over entire test area 3.Pulsed xenon light source.Single long pulse with constant intensity for up to 20ms. Constant intensity,instability<0.5%(class A).Filtered to ASTM E927 and (IEC 60904-9) Class A spectrum ,3s interval to next pulse.Variable intensity from 20 to 120mW/cm2,measured by calibrated reference cell 4.Tests either crystalline or thin film modules and cells

【Specification】

1.Maximum Module Dimensions:(other XJCM-9 SOLAR CELL TESTER sizes are available) length: 16cm width: 16cm
2.Light source Long-arc pulsed xenon lamp,
Pulse Width: 20ms
Full area intensity: 20 to 120mW/cm2
lamp lifetime nominal: 300,000 flashes
3.Illumination Uniformity
±2% over 16cm x 16cm area
4.Measurement Range
Voltage: 0-1V
Current: 0-10A
5.Resolution:(lowest range)
Voltage: 0.3mV
Current: 0.5mA
6.Equipment Dimensions
(excluding computer system)
Width: 50cm
Depth: 50cm
Height: 80cm
7.Equipment Net Weight
80 Kgs
8.Utilities Requiremnts
Electricity: 190-240VAC,10A,50/60Hz,single phase
Compressed air: 100 1/min.at550kpa
Options:
Filtered calibrated reference cell for testing thin film modules special voltage and current measurement ranges.
Throughput:up to 720 cells/hour(operator dependant)