SNMP Managed Protocol Converter Rack

16slots:
snmp

Brand Name:
Fibridge



Model Number:
FC-416

Type:
DC/DC Converters






Overview


FBPC100 Series gives the interface conversion between G.703 E1 and V.35. This device provides an economical digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.FBPC100 Series is widely used in communication network, both in WAN and LAN connection field.



Features




Interface conversion between E1 and V.35, E1 and Ethernet



Support ITU-T V.35, G.703, G.704, G.823



Fully compatible with IEEE 802.3 and Ethernet Standards



Standalone and chassis module available, support hot-swap



Framed (N*64Kbps) and unframed (2.048Mbps) optional, support continuous and discontinuous timeslots setting



Ethernet port 10Mbps, Full/Half Duplex mode compatible



10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover



Frame mode support PCM30/ PCM31



CRC/non-CRC auto-negotiation on E1 interface



Support remote bandwidth control, and remote loop back under framed mode.



Support internal clock, E1 recovery clock or V.35 line clock



Provide local, diagnostic and remote loop back test.



For E1 interface, 75 ohm (unbalanced) and 120 ohm (balanced) available and auto-negotiation.



For V.35 interface, DCE and DTE mode are optional



Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state



Management




Support Console, WEB and SNMP management



Provide Timing Mode Setting, Loop back mode setting, Framed or Unframed mode setting clock resources selection, and etc.



Provide environment parameter monitoring, including power supply status and device operation temperature



Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version



View & configure the working status of local and remote device, including connection status, port status



Provide user management to ensure the device operation security



Specifications




E1 ports




Compliant with: ITU-T G.703, G.704, G.823



Rate: 2.048Mbps



Code type: HDB3



Impedance: 75 ohm unbalanced & 120 ohm balanced optional



Physical connector: BNC for unbalanced & RJ45 for balanced



V.35 interface:




Compliant with V.35 standard



Rate: n?4Kbps, n=132



Physical connector: DB25 female jack



DCE & DTE optional



Ethernet ports




Compliant with: IEEE802.3, 802.3u, 802.3x



Rate: 10Mbps, Half/Full auto-negotiation



Auto MDI/MDI-X



Physical connector: RJ45



Environment




Operation Temperature: 0~50



Operation Relative Humidity: 0~90%



Store Temperature: -20~65



Store Relative Humidity: 0~95%



Overview FBPC100 Series gives the interface conversion between G.703 E1 and V.35. This device provides an economical digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.FBPC100 Series is widely used in communication network, both in WAN and LAN connection field. Compliant with:ITU-T G.703, G.704, G.823 Rate:2.048Mbps Code type:HDB3 Impedance:75 ohm unbalanced & 120 ohm balanced optional Physical connector:BNC for unbalanced & RJ45 for balanced Rate:n?4Kbps, n=132 Physical connector:DB25 female jack Compliant with:IEEE802.3, 802.3u, 802.3x Rate:10Mbps, Half/Full auto-negotiation Physical connector:RJ45 Operation Temperature:0~50 Operation Relative Humidity:0~90% Store Temperature:-20~65 Store Relative Humidity:0~95%