Glorystar N36 is a one-component neutral cure silicone sealant
containing high concentra tions of fungicide in order to prevent
appearence of mould. Sealing for bathroow fiftings, screens,
bathrooms, kitchens and damp places.
Directions for use:
Ensure all the surfaces to be sealed are clean, dry and
Cut off the tip of the small threaded protrusion on top of the
tube. Screw the pointed nozzle to the remianing.
Apply sealant with caulking gun. Tje sealant will form a layer on
the surface in approximately 10 minutes at 25 degree and will be
dry to touch in 1 hour. It will be fully cured in 24-48 hours
depending on the surface to be sealed.
Ensure good ventilation when used indoors. Avoid direct contact
with skin. If exposed to eyes, flush with water and consult with a
physician immediately. Keep out of reach of children.
Do not use for structural glazing applications.
Sagging Degree(mm) ≤ 3mm
Extrusion Performance(s) ≥ 80ml/min
Surface Drying Time(min) ≤ 60min
Stretching Binding Strength(Mpa) ≥ 0.45Mpa
Maximum Strength Elongation(%) ≥ 150%
Displacement Capacity(%0 ± 20%
Hardness HsA 20-50
Resistance of Mouled: 0-1 Grade
Storage: Temperature should not exceed 30 degree for prolonged
Caution: Use within 9 months.&
| Perfomance|| Index|
| Sagging Degree(mm)|| ≤3min|
| Extrusion Performance(s)|| ≥80ml/min|
| Surface Drying Time(min)|| ≤60min|
| Stretching Binding Strength Mpa(23ºC)||≥ 0.45Mpa|
| Maximum Strength Elongation(%)||≥ 150%|
| Displacement Capacity(%)|| ±20%|
| Hardness HsA|| 20-50|
|Resistance of Mouled||0-1 Grade|